Brief:
Easy t' build kit with plastic nose cone, me bucko, die-cut balsa fins, me hearties, and 12" parachute.

Construction:

• 1 - 9" BT-50 Body Tube
• 1 - Plastic Nose Cone
• 1 - 18mm Engine Tube
• 1 - Engine Hook
• 2 - Centerin' Rings
• 1 - 18mm Engine Block
• 3 - Balsa Fins
• 1 - 12" Plastic Parachute
• 1 - Elastic Shock Cord
• 1 - 1/8" ID Launch Lug
• 1 - Wrap Decal
• 1 - Paper Shock Cord Mount

This kit was easy t' build. Arrr! Avast, me bucko, me proud beauty! T' instructions were easy t' follow. Begad! No special tools were needed. Aye aye! Just glue, a hobby knife, shiver me timbers, a ruler, me bucko, pencil and angle iron. I did use a hot glue cannon for t' shock cord mount.

Finishing:
T' finishin' was simple. I just sanded, me hearties, primed and painted t' finished rocket. I painted it t' suggested blue color.

T' Zero Gravity decal wrap was easy t' apply and looked great. Well, blow me down! It be good quality vinyl like a bumper sticker. Arrr!

I would have given it a 5 if t' Custom parachute had been pre-assembled. Aye aye! I guess I have been spoiled by Estes parachutes.

Construction Rating: 4 out o' 5

Flight:
I flew t' rocket 3 time on A8-3 motors. Blimey! I highly recommend this motor size for small fields. T' rocket flew straight and landed close even though t' wind be blowing.

I would have tried a B6-4 if t' wind be nay as strong and if t' field was larger.

Recovery:
T' shock worked well. Ahoy! And dog barf worked excellent for replacin' wadding. Arrr! All flights were recovered close t' t' pad with no damage.

Flight Rating: 5 out o' 5

Summary:
Overall, me hearties, me hearties, it is a great, simple kit t' build. Ahoy! I would recommend this rocket if you are looking for an easy t' build rocket kit that looks good and flies great.

Overall Rating: 5 out o' 5