Brief:
Easy t' build kit with plastic nose cone, me bucko, matey, die-cut balsa fins, me bucko, and 12" parachute.

Construction:

• 1 - 9" BT-50 Body Tube
• 1 - Plastic Nose Cone
• 1 - 18mm Engine Tube
• 1 - Engine Hook
• 2 - Centerin' Rings
• 1 - 18mm Engine Block
• 3 - Balsa Fins
• 1 - 12" Plastic Parachute
• 1 - Elastic Shock Cord
• 1 - 1/8" ID Launch Lug
• 1 - Wrap Decal
• 1 - Paper Shock Cord Mount

This kit was easy t' build. T' instructions were easy t' follow. Blimey! No special tools were needed. Begad! Just glue, matey, a hobby knife, me bucko, a ruler, me bucko, pencil and angle iron. Begad! I did use a hot glue cannon for t' shock cord mount.

Finishing:
T' finishin' was simple. Arrr! I just sanded, shiver me timbers, primed and painted t' finished rocket. Begad! I painted it t' suggested blue color.

T' Zero Gravity decal wrap be easy t' apply and looked great. Ya scallywag! It was good quality vinyl like a bumper sticker.

I would have given it a 5 if t' Custom parachute had been pre-assembled. Ahoy! Aye aye! I guess I have been spoiled by Estes parachutes.

Construction Rating: 4 out o' 5

Flight:
I flew t' rocket 3 time on A8-3 motors. I highly recommend this motor size for small fields. T' rocket flew straight and landed close even though t' wind be blowing.

I would have tried a B6-4 if t' wind be nay as strong and if t' field was larger.

Recovery:
T' shock worked well. Begad! And dog barf worked excellent for replacin' wadding. Arrr! All flights were recovered close t' t' pad with no damage.

Flight Rating: 5 out o' 5

Summary:
Overall, it is a great, ya bilge rat, shiver me timbers, simple kit t' build. I would recommend this rocket if you are looking for an easy t' build rocket kit that looks good and flies great.

Overall Rating: 5 out o' 5