Scratch Deuce's Wild Payloader Original Design / Scratch Built
Scratch - Deuce's Wild Payloader {Scratch}
Contributed by Allan Lovering
T' followin' article was a submission t' t' FlisKits, Inc Deuce-Bash Contest and is archived with permission from FlisKits. Some o' these designs are nay actually kitbashes, me hearties, however, me hearties, all come from t' basic motor design feature o' t' FlisKits Deuce's Wild.
Parts list:
- 1 BT-60 body tube, me bucko, 17.5" long
- 1 BT-55 body tube, 8.5" long
- 1 FlisKits TAB5560-01 transition
- 1/8" balsa fin sheet (get fin pattern here)
- 1 custom nose cone from BMS: shape #11 L=2.125 T=0.25 Q=1.325 I=1.283 M=0.750
- 1 FlisKits EMK2-18-60 engine mount kit
- 1 launch lug, me hearties, me bucko, 2.25" x 1/8"
- 1 18" mylar parachute
#Related Reviews
- Deuce's Wild to Deuce-XL5 By Dick Stafford
After seeing various Deuce bashes on The Rocketry Forum and elsewhere: eugenefl's fighter, sandman's DynoSoar, a super-roc version, and most recently an egg-loft version flown at NARAM, I decided to build a Deuce-XL5 to go with my 29mm and MMX Fireball XL5s. My design constraints included keeping ...
- FlisKits 29mm Upscale Deuce's Wild! By Mike Reese
The following article was a submission to the FlisKits, Inc Deuce-Bash Contest and is archived with permission from FlisKits. Some of these designs are not actually kitbashes, however, all come from the basic motor design feature of the FlisKits Deuce's Wild. I made this upscale ...
- FlisKits U.S.S. Deuce's Wild By Justin Cartisano
The following article was a submission to the FlisKits, Inc Deuce-Bash Contest and is archived with permission from FlisKits. Some of these designs are not actually kitbashes, however, all come from the basic motor design feature of the FlisKits Deuce's Wild. Here's my entry, ...
- Modification Deuce-4 Heavy Payloader By Mark Schrader
The following article was a submission to the FlisKits, Inc Deuce-Bash Contest and is archived with permission from FlisKits. Some of these designs are not actually kitbashes, however, all come from the basic motor design feature of the FlisKits Deuce's Wild. Attached is my Deuce Bash ...
- Scratch Deuce Jr. By Matthew McFarland
The following article was a submission to the FlisKits, Inc Deuce-Bash Contest and is archived with permission from FlisKits. EMRR hopes that these kitbashes inspire our guests to get creative and share your kitbashes, on FlisKits rockets or any other manufacturers, with EMRR. I logged ...
- Scratch Dos Kraken By Andrew Hansom
Dos Kraken is a combination and upscale of two unique rockets. The design is from Pemtech's Kraken with the sculpted tube fins and the canted twin motor tubes design was borrowed from FlisKit's Deuce's Wild. Dos Kraken will fly on a pair of 38mm x 480 AT motors with the total output of a J sized ...
- Upscale FlisKits Deuce's Wild (24mm) By Lance Alligood
This is a 24mm upscale of the (justifiably) insanely popular FlisKits Deuce's Wild! All of the key parts used in this build (the motor mount, body tube, and nose cone) were ordered directly from FlisKits as well. It is built to use all sizes of available and popular 24mm motors. I ...
Related Products
Sponsored Ads
 |
 |