Brief:

Aerospace Speciality Products (ASP) makes a couple o' different V2 Kits. This be t' 1/40th scale kit, me bucko, with t' 24mm motor mount. T' kit builds into a rocket that is 359mm long and 42mmm in diameter. Ya scallywag! Recommended engines include D12-5, E15-7 & E30-7, me bucko, though t' documentation states that it can be flown on B & C motors with a suitable adapter.

T' kit contains t' followin' parts:

• Engine Tube
• Engine block
• Centerin' ring
• Body tube
• 1/8" Basswood fin stock
• 1/8" Basswood strip
• 3/32" Basswood strip
• Balsa nose cone
• Balsa boattail
• 1/4" Elastic shock cord
• Launch lug
• 15" mylar parachute
• Adhesive mylar tape
• Shroud lines
• Snap swivel

Construction/Finishin' Techiniques:
T' engine and body tubes are good quality cardboard with a glassine finish. Aye aye! Ahoy! T' body tube has very little trace o' a spiral. T' basswood stock is o' good quality, but is nay pre-marked, matey, a template bein' provided for cuttin' out t' fins and servo pods. Aye aye! T' nose cone has a prefitted eye hook, is pre-weighted, and is pretty heavy! T' nose cone and boattail are well shaped and O.D. Arrr! is slightly oversized compared t' t' body tube, ya bilge rat, which is good, matey, because they need sealin' and sandin' if a good finish is required. Avast, me proud beauty! Begad! T' shock cord doesn't seem long enough, arrr, given t' weight o' t' nose cone. Enough shroud line is provided t' run all t' way t' t' center o' t' 'chute, t' mylar tape bein' provided t' fix them in place. Arrr! T' snap swivel looks a little light, ya bilge rat, with t' 'snap' itself bein' a little flimsy, matey, compared t' t' weight o' t' nose cone.

T' instructions are good, with very clear descriptions o' each step, listin' t' parts and tools required and t' operation t' be performed. Arrr! Diagrams are provided where required. Aye aye! Ya scallywag! They are particularly good when describin' t' steps needed t' produce a good finish. Avast, me proud beauty! Aye aye! Tricky details such as t' servo pods and t' turbine exhausts are also well described. Two different paint schemes are included in t' instructions. Avast, me proud beauty! No decals are supplied. References are given for further research.

This isn't a beginners kit. Blimey! T' fins and servo pods are nay simple shapes t' cut out from balsa, me bucko, and t' slots in t' fins t' mount t' servo pods, trickier still. You are expected t' shape t' turbine exhausts from t' basswood stock, although this is a detail that could be omitted if necessary.