Brief:
For this bird I used t' parts from an Estes Baby Bertha and a Quest Full Moon t' come up with somethin' just a bit different.

Construction:
For this build I used t' Baby Bertha's airframe as is out o' t' package but used t' Full Moon's three fins. Ahoy! Avast, me proud beauty! For the booster, arrr, I cut t' Full Moon's airframe t' t' same length as t' root o' t' Baby Bertha's fins, matey, matey, usin' all four. T' motor mounts were assembled as per basic kit instructions. Avast, me proud beauty! Aye aye! I cut a section o' t' left over Full Moon airframe to use as a stagin' coupler glued into t' top o' t' booster. I used t' included shock cord and parachute from one kit for recovery. Aye aye! I did nay use a motor hook on either t' sustainer or t' booster preferrin' t' friction fit t' motors. I did use t' engine blocks.

Finishing:
I used one coat o' sandin' sealer on t' balsa fins and finished up usin' Krylon paint.

Flight:
First flight be on a B6-0/A8-3 with breezy conditions. Avast! Second flight be B6-0/A8-3 and third flight on C6-0/B6-6.

Recovery:
Recovery be normal on all three flights.