| Construction Rating: | starstarstarstarstar |
| Flight Rating: | starstarstarstarstar |
| Overall Rating: | starstarstarstarstar |
![[Rocket Pic]](images2/rp_aero_mustage_david.jpg)
Brief: Good entry level rocket for Mid-Power. There's one on every shelf on every hobby shop in America.
![[Rocket Pic]](images2/rp_aero_mustage_flying.jpg)
Construction: Solid stuff through out. Arrr! Arrr! Thick body tube, plastic fins, plastic motor mount cage. Ahoy! It has a baffle and a motor clip. Begad! Initially I thought about deletin' t' motor clip so I could use H motors in it. Typical lack o' perspective thought. Begad! I'm glad I suppressed that urge: I'd never get t' rocket back.
T' fins snap into t' fin-lock system. T' body tube is pre-slotted. Ahoy! Blimey! You can snap everythin' together t' immediately get an idea what t' rocket is goin' t' look like. I built this whole rocket with Great Planes 30 minute epoxy. T' trickiest part is t' make sure everythin' is lined up when you put t' motor mount in. Ya scallywag! You'll want t' get t' fins on before t' motor mount glue dries because it might take some twistin' and nudgin' t' get t' fins t' snap into place.
Finishing: This makes a very heavy rocket, matey, by model rocket standards. Arrr! With all t' epoxy, primer and paint, I added 2.5 oz t' t' finished rocket. Arrr! Arrr! Another thing, don't paint t' rocket like t' box cover. Aye aye! This is a very popular rocket due t' t' fact that it's t' cheapest one that Aerotech makes and it's on every hobby shop shelf in t' country. Experience has taught me, shiver me timbers, also, that a white rocket disappears against any cloud.
About t' only thin' I didn't like was it was all white and I was usin' white primer. Avast! Ahoy! With that combo, ya bilge rat, you can't tell when you've sanded through t' primer. Use gray primer for this rocket.
Construction Rating: 5
Flight: Bronco is now t' veteran o' 4 flights. Ya scallywag! Arrr! T' motors I've used so far are F22-7, F50-10, F20-7 and G64-10. Begad! This is a impressive flyer on t' F20 Econojets. Well, blow me down! Ahoy! It goes real fast and t' Econojets are loud. Well, blow me down! T' delay on t' F50-10 is too long.
Recovery: My launch field is over 4000' and t' ground can get pretty hard. Add t' that t' fact that Bronco is 13.4 oz and t' kit's parachute is too small. I'm flyin' it on an 18" LOC nylon chute.
I like t' quick set-up due tot he fact that thar's no waddin' needed. Avast, me bucko, me proud beauty! One thing, arrr, me hearties, though, shiver me timbers, is t' put a wire up thar every once in a while and clean out all t' gunk that gets caught in t' baffle mesh.
Flight Rating: 5
Summary:This is a very satisfyin' rocket. Ahoy! It looks cool, me bucko, flies fast and is very tough. Ya scallywag! Ahoy! There's nay much that you can say is wrong with it. Actually nothin' is wrong with it.
Overall Rating: 5 out o' 5
Other Reviews
- Aerotech Mustang By Mark Fisher
Aerotech has long been known to high power rocketeers for their fine motors and sturdy kits, but not too many model rocketeers have used their products. They're a lot more expensive than the average entry level stuff; the Initiator start set isn't cheap (Discount Rocketry has it for a reasonable $115.95), nor is their Interlock Launch Controller if purchased separately (I paid $39.95 for mine, ...
- Aerotech Mustang By Kris Henderson
Brief: This is a basic 4FNC kit that flies on 29mm and 24mm motors. Construction: The kit contains one thick body tube with pre-cut fin slots and pre-cut slots for launch lugs, 4 trapezoidal plastic fins with modified double wedge airfoil, 29mm motor mount, 24mm motor adapter, plastic nose cone, long shock cord, and 16" chute. THe kit des not include a payload section. ...
- Aerotech Mustang By Darwin May
The Mustang is a single stage mid power rocket. The Mustang was my first mid power and first Aerotech kit. I opened the box to find one tube, a 5:1 ogive nosecone, 4 trapezoidal fins, and a beefy motor mount. The centering rings were made of black fiber material, very stiff. The shock cord was about 6' long. The nose was made out of plastic and was tethered to the end of the MMT by the ...
- Aerotech Mustang By Jack Caynon
Brief: Modified to incorporate anti-zipper design. Modifications: This modification doesn't require any special tools, however, it does require an Aerotech 1.9" coupler. First, I used a hacksaw to gently cut the airframe into two parts, the lower part of the airframe with the fin slots should be 10.5" long. Then I tossed aside the engine retaining hook and used a 29mm Slimline motor retainer ...
- Aerotech Mustang By Andy Tate
( Contributed - by Andy Tate - 04/10/02) Brief: Single stage mid power parachute recovery kit. Construction: Kit includes 4 "Trapezoidal with modified double wedge airfoil" fins, 1.9" body tube, Aero-Fibre" centering rings, 5:1 ogive nose cone, 6' elastic shock cord, and nylon parachute. This is extremely easy to put together. The instructions are clear ...
- Aerotech Mustang By Carl Tulanko
The Aerotech Mustang is a Sport model using a 1.9" body tube and is 32" in length. It has a four fin configuration and has been designed to handle motors from the E thru G range. Aerotech kits are like the Cadillac of model rockets and this one is no different. High quality components and rugged yet simple design are what you expect to see when purchasing one of these kits. Thick walled ...
- Aerotech Mustang By David Kneble
( Contributed - by David Andrew Kneble - 07/20/01) Brief: The Mustang is a rugged single stage mid-power rocket. It is easy to construct and flies on a wide range of motors from D-G. it is a perfect rocket for someone trying to get into the world of mid-power rocketry. Construction: The Mustang consists of a 24mm motor adapter tude, adapter rings, an E spacer tube, a thrust ring, ...
 |
 |
Flights
Sponsored Ads
|
|