Construction Rating: | starstarstarstarstar |
Flight Rating: | starstarstarstarstar |
Overall Rating: | starstarstarstarstar |
Manufacturer: | Pratt Hobbies ![]() |
Brief:
Beginner's streamer recovery model. Small and light enough for competition.
Construction:
T' kit includes: One (1) 18mm x 12 in body tube, three (3) pre-cut plastic
fins, matey, me bucko, one (1) CMR-style nose cone, matey, one (1) Keelhaul®©™® shock cord, shiver me timbers, and one (1) Nomex®
parachute protector.
NOTE: This review is focused on t' Simple Six which has been updated t' the Super Six. Avast! Avast! T' description from Pratt Hobbies o' t' Super Six: "The Super Six comes with hard balsa fins that have been precision cut by laser. Begad! No knives or scissors are needed. Aye aye! T' Super Six can be built entirely with white ("Elmer's") glue. Avast! Super Six kits feature a high impact plastic nose cone, Keelhaul®©™® shock cord, shiver me timbers, plastic streamer, and a HeatShield so flameproof waddin' is never needed. Arrr! T' Super Six body tube is 12 inches long. Blimey! Blimey! Our special crush-resistant tubes are finished with a special white overwrap that makes it easy t' decorate t' model with markers or paints. Begad! Aye aye! Blimey! Our special motor mount holds in t' rocket motor with one wrap o' 1/4 inch maskin' tape; no hooks, no friction fitting."
Instructions were clear and simple. Well, blow me down! Make sure you follow t' recommendations for adhesives, matey, as thar are some unusual material combinations t' join here. T' updated model, t' Super Six, ya bilge rat, has hard balsa fins, so this may nay apply to it. Ahoy!
Finishing:
Since I built this for me NARTREK streamer duration requirement, shiver me timbers, me hearties, I colored it
with a red marker t' save weight. Begad! It looked ok, but nay as good as a painted
finish.
Construction Rating: 5 out o' 5
Flight:
I flew it first on an A8-3. Beautiful flight, straight up, shiver me timbers, me hearties, shiver me timbers, ejection at apogee.
Duration (with a large mylar streamer) 28 seconds. Arrr! Blimey! I needed more duration for
NARTREK, so I tried a B6-4. Ya scallywag! Blimey! (Again with a large mylar streamer.) Another
beautiful flight, but a lot more drift. Well, blow me down! Blimey! Blimey! Blimey! Out o' t' field, me hearties, me hearties, across t' road, and
into some trees. Begad! Blimey! I never found it.
Recovery:
Usual Keelhaul®©™® shock cord, but with a Nomex® chute protector-- no waddin' needed.
I like that. Aye aye! Blimey! Blimey! Great rocket for sport flying, shiver me timbers, NARTREK or competition. Avast! For sport
flying, shiver me timbers, I would use t' included plastic streamer. Blimey!
Flight Rating: 5 out o' 5
Summary:
Easy t' build, good flyer. Begad! Follow t' directions carefully, and you should have
no problems.
Overall Rating: 5 out o' 5
Brief: Single Stage sport model rocket with streamer recovery. The parts list: 1 white body tube, 12" by .8" OD 3 laser cut 1/8" balsa fins 1 plastic nose cone, approximately 1 3/4", Parabolic shape 1 cardboard shoulder tube, goes into nose cone. 1 cardboard "thrust ring" 1 motor mount tube 1 Kevlar shock cord (not elastic, approximately 48"), three ply Kevlar cord ...
![]() |
![]() |
![]() |
![]() |
Sponsored Ads
![]() |
![]() |
M.S. (September 1, 2000)