Descon Fur-Lined Cold Weather Rocket
Scratch - Fur-Lined Cold Weather Rocket {Scratch}
Contributed by Richard Hickok
| Manufacturer: | Scratch |
Contributed by -
Richard Hickok
Fur-Lined Cold Weather Rocket
| Quantity | Item Description |
| 1 | Heavy Nap 9" Paint Roller |
| 1 | Plastic Easter Egg |
| 1 | Balsa standoff block for launch lug |
| 1.25" | 3/16 inch aluminum tube for launch lug |
| 1 | 5.25" length o' BT-20 |
| 1 | Robitussin Cap |
| 3 | Balsa Fins |
Construction
This rocket be made from a heavy-nap 9" paint roller. Add a 2.25" diameter plastic Easter Egg half as t' nosecone. A Robitussin measurin' cup was glued with contact cement into t' nose cone as a shoulder. A 5.5" BT-20 body tube is centered by through t' wall balsa fins and a forward (custom diameter) centerin' ring. T' launch lug is 1.25" o' aluminum tube on a 1/2 inch balsa standoff.
T' cardboard cutout method was used for CG/CP determination and clay was added as nose weight. Two small holes were drilled into t' bottom o' the Robitussin cup bottom t' attach t' shock cord and chute.
Flight Log
T' "fur lined cold weather rocket" has flown successfully over a dozen times and is a real crowd pleaser.
Sponsored Ads
 |
 |