Brief:
This is a stretched version o' t' FlisKits Thing-A-Ma-Jig. Blimey! A simple, easy quick build for beginners and educators. Ya scallywag! In fact, t' only kit simpler t' build is an RTF!

Modifications:
I didn't start this one out intendin' t' do a review on it, arrr, but after t' smoke cleared--pardon t' pun--I decided t' do a quick write up on it. Begad! I bought three of them from Jim at t' NERRF II launch because I wanted somethin' for me 12 year old daughter and 7 year old niece t' build together.

T' build went quickly. They were finished in about 45 minutes. Aye aye! Blimey! Dad/Uncle Drake (that's me) wanted t' do somethin' different so I used a 32" tube for t' body rather than t' 16" tube supplied. Nay wantin' t' be outdone, the girls insisted on followin' suit. Luckily I had enough tubes t' go around.

Construction:
Parts list:

• 1 1" diameter body tube
• 3 balsa fins
• 1 MMT
• 1 chute

T' interestin' thin' about this kit be t' way t' fins go together. Begad! They have laser cut slots and tabs formin' a triangular box put together like puzzle pieces. Aye aye! Begad! Their assembly is so intuitive that t' girls had them together without discussion.

Flight and Recovery:
We launched these several times on several motors rangin' from A8-3s t' C6-5s. Each flight was flawless, however, Dad's ended up in a pond after only two flights.

Summary:
A simple, easy, me hearties, and quick build for beginners and educators. In fact, t' only kit simpler t build is an RTF!