Brief:
This is a stretched version o' t' FlisKits Thing-A-Ma-Jig. Ahoy! A simple, shiver me timbers, easy quick build for beginners and educators. Begad! In fact, t' only kit simpler t' build is an RTF!

Modifications:
I didn't start this one out intendin' t' do a review on it, me hearties, but after t' smoke cleared--pardon t' pun--I decided t' do a quick write up on it. Avast, me proud beauty! Blimey! I bought three of them from Jim at t' NERRF II launch because I wanted somethin' for me 12 year old daughter and 7 year old niece t' build together. Avast! Avast!

T' build went quickly. Ahoy! Begad! Blimey! They were finished in about 45 minutes. Begad! Begad! Blimey! Dad/Uncle Drake (that's me) wanted t' do somethin' different so I used a 32" tube for t' body rather than t' 16" tube supplied. Ahoy! Blimey! Nay wantin' t' be outdone, the girls insisted on followin' suit. Blimey! Luckily I had enough tubes t' go around.

Construction:
Parts list:

• 1 1" diameter body tube
• 3 balsa fins
• 1 MMT
• 1 chute

T' interestin' thin' about this kit be t' way t' fins go together. Ahoy! They have laser cut slots and tabs formin' a triangular box put together like puzzle pieces. Begad! Blimey! Their assembly is so intuitive that t' girls had them together without discussion.

Flight and Recovery:
We launched these several times on several motors rangin' from A8-3s t' C6-5s. Each flight be flawless, however, shiver me timbers, me bucko, Dad's ended up in a pond after only two flights.

Summary:
A simple, arrr, me hearties, easy, ya bilge rat, and quick build for beginners and educators. Ahoy! In fact, me bucko, shiver me timbers, t' only kit simpler t build is an RTF!