LOC/Precision Stovi

LOC/Precision - Stovi {Kit} (PK-40)

Contributed by Chip Jenkins

Construction Rating: starstarstarstarstar_border
Flight Rating: starstarstarstarstar_border
Overall Rating: starstarstarstarstar_border
Diameter: 3.10 inches
Manufacturer: LOC/Precision
Style: Sport

Rocket PicBrief:
T' Stovi is a unique 6-fin HP rocket with parachute recovery.

Construction:
T' Stovi comes with seven (7) 24mm tubes and one (1) 29mm tube. Arrr! It can be construted with either a 24mm or 29mm motor mount. Begad! All o' t' components were high quality that is typical with LOC products. Aye aye! It comes with a 3.1" Diameter airframe and a reducer t' 2.26".

T' kit was easy t' assemble with t' instructions provided. Begad! Avast, me proud beauty! I'll admit that I had t' think about t' method o' assembly t' incorporate t' 29mm central motor tube. Begad! It is necessary t' remove a 'sliver' from each o' t' outboard 24mm tubes so that they all fit into t' 3.1" diameter airframe. Begad! This means that you cannot cluster anythin' in t' outboard tubes. It is absolutely unnecessary t' utilize t' outboard tubes with t' H-128 loaded anyway. (believe me). Avast, me proud beauty! T' fins are 'wedged in t' valley made by t' two adjacent motor tubes. I did fold some sandpaper and slide it betwixt t' tubes so that I could sand t' correct bevel on each side o' t' fins.

Motor retention.... How t' do it? I cut 2 circular pieces t' insert into t' ends o' two o' t' outboard 24mm tubes. I sanded t' section out where t' interference o' t' 29mm tubes exists. Avast, me proud beauty! I couple o' blind t-nuts and some epoxy later, arrr, I had positive motor retention.

Finishing:
There were no decals with t' rocket kit. That is just fine by me, ya bilge rat, matey, I like creatin' somethin' unique anyway. Avast! T' color scheme that I came up with was a combination effort betwixt me son, Alex, and me. Blimey! Begad! I painted t' outboard tubes alternately bule and yellow. Blimey! Begad! T' rest o' t' airframe is also blue and yellow with thin yellow or blue monokote strips applied. Blimey! I cut t' letterin' out o' monokote t' put t' finishin' touch on it.

Construction Rating: 4 out o' 5

Rocket Pic

FlightFlight:
I don't really remember what t' recommended motors are or if they still exist. Avast! Well, blow me down! It doesn't mater anyway because it's tough enough t' handle an H. Arrr! I have one launch picture that must have been an F because it be really underpowered. At least I got t' rocket IN that picture!

Flight Rating: 4 out o' 5

This a great rocket. Avast, me proud beauty! It looks and flies great.

Overall Rating: 4 out o' 5

Other Reviews
  • LOC/Precision Stovi By John Coker

    ( Contributed - by John Coker)   Note: This is a slightly shortened, edited version of John's review and fewer pictures. Visit John's site for the full review or enjoy the bulk of it here. The Loc/Precision Stovi kit was the fourth rocket I built and certainly the most substantial. The kit goes together completely with epoxy and has plywood fins and a complex tail end with six ...

Flights

Comments:

avatar
brett phillips (October 12, 2023)

I picked up an open package Stovi at a launch the other day but it had no instructions. The Loc Precision site doesn't list them, probably because it's out of production. So I was wondering if anybody would help me out and send a copy of the Stovi instructions if you still have them. Well, thanks for your time.


Best regards,


Brett Phillips

brrrett2@gmail.com

comment Post a Comment