Modification The 'Big Daddy' Educator
Modification - The 'Big Daddy' Educator
Contributed by Joy Sills
| Manufacturer: | Modification |
Brief:
T' Educator is a modified Big Daddy. Avast! T' modifications include addin' a 12" payload section and usin' basswood for fins and centerin' rings.
Modifications:
T' first modifications were addin' basswood fins and centerin' rings. Begad! Blimey! Begad! Blimey! T' second modification was addin' a payload section. Ahoy! Blimey! Ya scallywag! Blimey! This was accomplished by usin' an additional 12" section o' body tubing. Begad! Blimey! A MDF coupler was then epoxied into t' 6" coupler. Well, blow me down! Blimey! T' coupler was then epoxied into t' aft end o' t' payload section. Blimey! Blimey! T' bulkhead contained an eye screw for t' upper attachment point for t' shock cord. Blimey! Blimey! Custom 1/4" launch lugs were then added. Avast! Blimey! A motor retention system was created by two screw receptors bein' added t' t' aft centerin' ring. Aye aye! Blimey! A basswood plate is then screwed down t' hold in t' motor.
Construction:
t' parts used included:
- Big Daddy Kit (3" Pre slotted Body Tube, Nose cone)
- 1 Payload Section (3" Body Tube)
- 1 6" Coupler
- 1 MDF Bulkhead
2 Eye Screw- 2 Basswood Centerin' Rings
- 4 Basswood Fins
- 2 1/4" Launch Lugs
- 1 Motor Retention Plate
- 2 Screw Receptors
- 2 Screws
- 1 24" Nylon Parachute
- 1 Elastic Shock Cord
Finishing:
T' Educator was finished t' look like a school bus. It was primed then painted yellow with black fins. Pin stripes and custom decals were added t' create t' school bus look. Aye aye! Then t' whole thin' was cleared coated.
Flight:
I prepared t' Educator for flight by attachin' a Nomex shield t' t' shock cord so that it wouldn't require wadding. Then I friction fit an Estes E-9 in t' Educator before I placed it on t' launch stand. T' flight be okay, shiver me timbers, but t' rocket weathercocked considerably into t' wind.
Recovery:
T' shock cord be attached t' a bulkhead in t' bottom o' t' coupler and t' t' centerin' rin' in t' booster section. Ahoy! T' parachute and Nomex shields were both attached t' t' shock cord. This made for easy recovery. Aye aye! T' parachute deployed too slowly and t' fin was damaged.
Summary:
T' rocket be too heavy.
#Related Reviews
- Modification Bad Dad By Larry Brand
Brief: I modified the Big Daddy kit to replace the stock nose cone with a fixed nose cone made from a PET soft drink bottle; parachute deployment is from an open "mortar" mounted on the bottle opening. Rationale? I swiped the nose cone from a family member's Big Daddy kit to use in a building ...
- Modification Big Bad V-2 Daddy By Michael Bade
How to Make a V-2 out of an Estes Big Daddy Frustrated with the lack of availability of an affordable V-2 kit, I started thinking of ways to come up with a cheap and easy kit-bash from an existing in production kit that wouldn’t involve a lot of money or time. I also wanted to make a ...
- Modification Big Daddy (29mm) By Stephen Morrow
Brief: Modified Estes Big Daddy to fly on 29mm motors. Modifications: I started this project with a regular Estes Big Daddy. When I bought the kit I knew I wanted to mod it to a 29mm so I bought a motor tube and cut it to a length that would allow it to come up and touch the base of the nose ...
- Modification Big Daddy (29mm) By Sascha Grant
I've always liked the Estes Big Daddy, but even flying on an E just wasn't good enough. So I went about building this to fly on a H - the H128 specifically. Components Out of the box, the kit includes: Nose Cone Centering Rings Pre-Slotted Body Tube Motor Mount ...
- Modification Big Daddy (3) By Mike Goss
A modification to the Estes Big Daddy to use much less wadding. Modifications: The Estes Big Daddy is a short, fat rocket. With this being the case, there is a large volume in the interior of the rocket that needs to be filled with wadding to protect the parachute. I am always looking for ...
- Modification Big Dipper Daddy By Dick Stafford
I bought this Big Daddy (on sale, of course) as a test-bed for a Micro-Hybrid motor. This required an extension of the motor mount, and the capability to house electronics in the nose cone. Before flying it on a Micro-Hybrid, I'll probably try it on a conventional motor with motor ejection (1st ...
- Modification Big Wild Daddy By Tony Turley
The Estes Big Daddy first caught my eye hanging on the rack at WV Hobbies in the fall of 1998. It looked to me to be a good candidate for conversion to 29mm power, so I put it on my Christmas list. My request was granted, and away I went. My first decision was to evaluate the kit parts to see ...
- Modification Dig Baddy By Yitah Wu
What is it about the Fat Boy, Onyx, Minie Magg, etc, that makes grown men's knees weak? I don't know, but the Big Daddy has it - and lots of it. I swung by Commonwealth Displays a couple of times, but they were out of the kit. The second time I was beat out by a telephone order by an hour or ...
- Scratch 3D Mega Daddy (3D MD) By Steve Lindeman
I was playing around with my Estes 'Big Daddy' one day when I discovered that its NC would fit the tube that my Aerotech Initiator came packed in. The decision was then made to acquire another Big Daddy and build the 3D Mega Daddy (3D MD). Components Only 3 components ...
Related Products
 |
 |
Flights
Sponsored Ads
|
|