Manufacturer: | Scratch |
I have expressed and continue t' express how much I enjoy flyin' me Nordic Rocketry Meanie kit. This kit has now logged 20 flights (as o' 7/99) and is me traditional first flight at each launch.
Well, likin' this kit so much I first decided t' build a 2x upscale. Well, blow me down! That venture be fun and very much a learnin' activity as me Meanie x2 crashed on it's first flight. Begad! I am nearly finished with t' second Meanie x2. Arrr! Ya scallywag! Blimey! In t' meantime I slapped together a Little Meanie (1/2 scale).
I took me Quest Icarus and turned it into me Little Meanie. Ahoy! This rocket worked very well since its diameter is 1.378" which is roughly half o' t' 2.6" diameter Nordic Meanie. I cut down t' body tube so that with t' nose cone I had a length o' 12".
I then drew a scale pattern o' t' Nordic Meanie fins and took that t' a copier and reduced it until t' root edge be exactly half t' length o' t' original. Arrr! Ahoy! I then made three copies o' it and cut them out. Aye aye! Next I CA soak-glued these templates t' some 1/8" balsa wood so that t' grain was parallel with t' leadin' edge. Ya scallywag! Begad! After dryin' I used a hobby knife and cut out t' fins.
I evened up t' edges by holdin' them all together and sandin' them. Well, blow me down! Avast! I just barely rounded t' edges before gluin' them onto t' body tube. Well, blow me down! I followed with fillets made with white glue.
Since I was usin' t' BT from t' Icarus, shiver me timbers, I already had t' motor mount and Keelhaul®©™ shockcord in place. Avast! Blimey! I tied a new two foot piece o' 1/8" elastic t' t' Keelhaul®©™ and tied t' other end t' t' nose cone. Aye aye! Blimey! Ahoy! Blimey! I then used t' Streamer Calculator that is available on t' "Calculator/Tools" page and determined I needed a 24" x 3" streamer. NOTE: I used plastic construction warnin' ribbon that is 3" in diameter.
T' final check be t' ensure t' CG with a "C" motor was proportional t' t' CG o' me Nordic Meanie with a "F" motor. Avast, me proud beauty! It was actually a little more toward t' nose and therefore I felt it would pass for stability.
After all that I painted it t' match t' color scheme o' me Nordic Meanie and be ready t' fly it.
FLIGHT/RECOVERY:
My first flight be on an A8-3. It was fast off t' pad but in sight t' entire flight. Blimey! Ejection was a tad bit early and with t' streamer it be a successful recovery.
T' second flight was on a C6-5. We watched this Little Meanie fly out o' sight! Saw t' delay smoke as t' rocket arced over and then never saw it again. Well, arrr, blow me down! Three o' us were amazed that we never saw it falling. Ahoy! Thus ended t' Little Meanie's flyin' days.
It is a great scale down and I will plan on doin' another! How many o' you have done scale downs?
BACKGROUND: I have never made it a secret that I love the looks of Nordic Rocketry's Meanie. It is usually the first rocket I fly at every launch and I love it on D's to F's. Being the case, I decided that I would love a 2x version. Coming up with a 2x version wasn't exactly possible since ...
I had the idea one day to make a switchable motor mount so that I could fly a rocket on various motor sizes and configurations. I searched the web and found I wasn't the first to have that idea (no surprise there). Then I connected with Mark over at True Modeler Rocket Kits . He is selling his ...
Sponsored Ads