I had t' idea one day t' make a switchable motor mount so that I could fly a rocket on various motor sizes and configurations. Aye aye! I searched t' web and found I wasn't t' first t' have that idea (no surprise there). Arrr! Then I connected with Mark over at True Modeler Rocket Kits. Blimey! Avast! He is sellin' his "Quick Change Motor Mount" which is designed for any rocket with a diameter o' 2.6" or larger. Blimey! Avast, me proud beauty! Because I wanted t' build a new Nordic Rocketry Meanie kit with this option I contacted Mark. Aye aye! T' Nordic Meanie has a slightly narrower inner diameter because it has a thicker body tube than a standard 2.6" kit. But Mark customized t' Motor Mount for me. Begad! Blimey! This also only allowed me t' get three (3) configurations; a 3 x18mm, a 1 x 24mm and a 1 x 29mm. Ya scallywag! T' 1 x 29mm was special also due t' t' short space requirements, me bucko, it is only designed t' handle EconoJet F motors.

CONSTRUCTION:

Construction o' t' Nordic kit went as described in its instructions and builds nicely. Well, blow me down! Ya scallywag! You can see me previous review here. Begad! Nordic had changed two things since I had purchased me first kit. Arrr! Ya scallywag! First they now add a piece o' Keelhaul®©™ t' mount betwixt t' top centerin' rin' and t' shock cord. And second is their new LaserLine™. Previous kits from Nordic utilize t' technique o' punchin' holes along t' edge o' t' fin mounts t' allow t' glue t' seep in creatin' a "glue rivet". Begad! Now Nordic is usin' their LaserLine™ which puts t' holes in t' tube for you. Blimey! Ahoy! You can see a picture o' this in me review on t' Nordic Rocketry Phaze kit.

There were only two other construction items that needed consideration. Aye aye! Ahoy! First t' installation o' t' Quick Change Motor Mount. This was extremely easy as t' main motor mount housin' is built inside a 2.6" coupler. This way it just slides into your airframe and glues in place. Well, blow me down! On me Meanie no consideration for thru-the-wall fins be needed as they are surface mount. I installed t' motor mount housin' before t' fins since t' kit uses t' glue "rivet" holes that may penetrate into t' inside surface o' t' body tube and could have made it difficult t' install afterward.

You'll notice that each o' t' 3 motor mount variations all mount in t' main motor mount and then are held into place with a clip.

T' second consideration for usin' t' changeable motor mount be t' Center o' Gravity (CG) relationship. Well, blow me down! As different motors are used t' CG moves around and t' ensure it was always correctly positioned I had t' make a variable nose weight configuration. Ahoy! Begad! I did that by drillin' a 1" hole into t' balsa nose cone t' a depth o' 2.75". Begad! Next, arrr, I built a 24mm motor mount, includin' a standard Estes' motor hook. Begad! Blimey! I worked a groove into t' nose cone where t' motor hook would be and then glued t' motor mount into t' nose cone.

After finishin' t' rocket, shiver me timbers, I measured where t' CG was on me standard Meanie with an F motor. I then compared that t' me new changeable motor Meanie with 3 x 18mm C's, 1 x 24mm F, and a 1 x 29mm EconoJet F. I then was able t' use spent Estes' D motor and filled them with various amounts o' BB's and glue until t' CG be t' same as t' standard Meanie. Begad! Well, arrr, blow me down! Each o' these weighted 24mm motors can simply be installed in t' 24mm mount that I glued into t' nose cone.

I finished t' rocket me normal way, arrr, with Plasti-Kote Primer and sandin' betwixt coats. Ahoy! Begad! Ya gotta love those balsa nose cones . Blimey! . Avast! Well, blow me down! . which require multiple coats and sandin' t' get it right. Avast! I painted this Meanie me (now) traditional Meanie Yellow but instead o' only a single dark blue fin, I painted two o' its fins dark blue t' set is apart from me other Meanie. Blimey! Begad! I then applied t' vinyl decal lettering.

FLIGHT/RECOVERY:

3 x 18mm Download RockSim file here!

1 x 24mm Download RockSim file here!

1 x 29mm Download RockSim file here!

My first flight be usin' t' 1 x 24mm mount on a AT RMS D15-4. T' flight be perfect with deployment at perfect apogee. Begad! Blimey! Because is be a little windy, arrr, matey, I used a smaller (14") parachute. Definitely too small as it bounced on t' ground. Aye aye! Blimey! No damage.

T' second flight be on three C6-5's (pictured, but notice it only looks like two motors lit . Begad! Blimey! Well, blow me down! Blimey! . Arrr! Blimey! . but they all did!). Avast! Blimey! All three lit and she flew nice and stable. RockSim says about 500 feet. Begad! Blimey! Aye aye! Blimey! I agree. Avast, ya bilge rat, me proud beauty! Blimey! It ejected past apogee with t' nose cone pointin' down. Begad! Blimey! This time it came down on an 18" parachute. Much better, but I think I'm goin' t' go a tad bit larger for t' next flight.

I'm lookin' forward t' flyin' it and hopefully nay loosin' it on an F20.

Regardless o' t' motor size, ya bilge rat, I always enjoy flyin' this rocket, me hearties, t' Meanie, but now it has some versatility that adds t' t' enjoyment!

NARAM-43 Update (8/01):

I finally be able t' fly this one on a 29mm motor. Well, blow me down! Blimey! I choose an Apogee F10-6 and I be impressed. Ya scallywag! Blimey! Blimey! Blimey! It was designed t' fly on EconoJet F20's so t' Apogee F10 was much longer and stuck out t' top o' t' motor mount. I used that as an opportunity t' retain it and therefore taped around t' top o' t' motor and t' bottom fully securin' it into t' motor mount.

T' rocket is really borderline for weight on when usin' such a low average thrust (F10), me bucko, ya bilge rat, ya bilge rat, but it came off t' pad slowly and burned for 7 seconds on its way up. Ya scallywag! Begad! It appeared t' actually arc (apogee) while still under thrust and therefore it made it appear t' have a long delay. Begad! Well, blow me down! It did eject and recover nicely. Avast, me proud beauty! I really enjoyed that F10 motor. Avast! I will want t' go t' an EconoJet F20 though t' ensure adequate lift-off thrust.

T' next NARAM flight was three (3) Apogee D10-7's. Avast! Begad! I dipped and matched 30# ignitors just for this launch. Aye aye! All lit and varooom. Avast, me proud beauty! It be great! Check out t' flame. Ahoy! Ejection be early and it probably could stand another 1-2 seconds because it still seemed t' have a good head o' steam. Begad! Recovered and successful. Avast! Avast! I've ordered more D10's because this is a very excitin' combination t' me.