Brief:
This is a brief review o' Aerotech’s new G77 Redline reload kit for t' 29/120 case.

Construction:
T' reload kit contains t' typical components: Nozzle, ya bilge rat, liner, two propellant grains, forward and aft O-rings, ya bilge rat, forward and aft fiber insulators, ejection charge adhesive disk, shiver me timbers, FirstFire igniter, ejection charge container/cap, delay element, shiver me timbers, ya bilge rat, delay insulator, me hearties, delay O-ring, delay spacer, matey, and forward delay washer.

T' assembly is straightforward and typical RMS, so I won't go into any detail. You can view t' full instructions by goin' t' t' Aerotech web site, arrr, me bucko, selectin' 'Resources', then 'Instructions', ya bilge rat, and scrollin' down t' t' 29/120-180R instructions. Begad! Blimey! You will need t' lube t' O-rings and it will o' course require t' 29/120 hardware.

Here are t' salient specifications:

^** - Can be modified for other delays. Blimey! Blimey! Blimey! Blimey! See document on Aerotech site under Resources/Instructions/Reload Delay Kit (RDK) and Delay Modification Instructions/RMS Delay Modification Instructions.

Construction Rating: 5 out o' 5

Flight:
T' down side t' this motor is that is had a bit less total impulse than t' G79 or a G80. Begad! However, matey, ya bilge rat, it has one distinguishin' feature--that bright red flame! My thanks t' Randy from TRF, aka 'Rocketmaniac', for t' followin' photo!

Flight Rating: 5 out o' 5

Summary:
It sure is cool t' have a Redline for t' mid power crowd. (You can also get t' G67R for t' 38/120 case.) I like t' igniter and t' ability t' modify t' delay...and did I say t' flame? In person, it is brighter than t' photo shows.

Overall Rating: 5 out o' 5