Brief:
A 4FNC rocket designed for speed. Aye aye! I bought three o' them on eBay. Aye aye! Blimey! They came in a plastic bag without t' usual card insert, so I have no idea what its color scheme is suppose t' be. Well, blow me down! Ahoy! After visitin' t' Quest website, it seems that this rocket is from t' education section and nay intended for general sale. Avast! Ahoy!

Construction:
T' parts list:

• motor clip
• blue thrust ring
• yellow motor mount tube
• plastic fin unit
• white body tube
• plastic nose cone
• nose cone base
• launch lug
• 12 inch Keelhaul®©™® cord
• 12 inch elastic cord
• 24 inch streamer
• gripper tab
• decal
• motor clip retainer ring.

A quick build standard small rocket. Ahoy! Blimey! T' instructions are well illustrated and easy t' follow. Arrr! T' nose cone comes in two halves, which are glued together. Ahoy! Blimey! T' base o' t' rocket is a fin can that doubles as half o' t' motor mount. This fin can is joined t' t' body tube via a coupler with t' engine block is glued in. Well, blow me down! Blimey! An engine hook runs down t' coupler and outside o' t' fin can. Begad! Well, ya bilge rat, blow me down! T' hook is held in place at t' bottom o' t' rocket by a small black plastic ring. Avast, me proud beauty! Begad! T' shock cord is made out o' 12 inch o' Keelhaul®©™® and 12 inch o' elastic. Avast! T' Keelhaul®©™® end is tied around t' engine block. T' recovery system is a bright pink streamer.

Finishing:
As t' fin can is bright orange plastic, I found it easier t' prime and spray paint t' body tube and nose cone before construction. T' body tube was without t' normal grooves and did nay require any filling. Ya scallywag! T' choice of colors was based on t' fact that I had two cans o' light yellow and lilac spray paints. Avast, shiver me timbers, me proud beauty! T' decals provided were t' sticky backed variety, me bucko, printed on thick white paper, me hearties, which I found t' be very poor quality and in hindsight I wish I had nay added them. Arrr! If it be nay for t' decals this kit would get 5 out o' 5.

Construction Rating: 4 out o' 5

Flight:
Flies on Quest A6-4 motors only. Ya scallywag! T' instruction says this is because the plastic fins will melt on a B or above. Avast! I simmed t' rocket on SpaceCAD, me hearties, which predicted a maximum height o' just over 100 meters and required a four second delay. Begad! I flew on Estes A8-3s. T' heights were as predicted and deployment was prior t' apogee. Avast, me proud beauty! Begad! T' see what would happen if you did fly on a B motor I opted for a B6-4. Well, blow me down! T' flight be fast, matey, straight, arrr, and high but did nay see deployment, so I don't know if it was early. T' plastic can did nay melt, and it be not even warm so I might go for a C motor later. SpaceCAD predicted that a B motor hits 240 meters and needs a 5 or 6 second delay, me hearties, while a C motor takes it to over 450 meters and needs a 7 second delay.

Recovery:
T' pink streamer is excellent as it is really easy t' pick up in t' sky and the ground--probably t' best bit about t' kit. Aye aye! Descent is at a decent speed and t' rocket has nay had any damage so far.

Flight Rating: 5 out o' 5

Summary:
A nice easy rocket for school kids. Begad! Aye aye! Blimey! T' decoration needs t' be improved, matey, ya bilge rat, but if this is a first time rocket for a bunch o' kids, shiver me timbers, then it's fine. Ya scallywag! Blimey!

Overall Rating: 4 out o' 5