Estes RediRoc Intruder

Estes - RediRoc Intruder {Kit}

Contributed by Jon Revelle

Construction Rating: starstarstarstarstar_border
Flight Rating: starstarstarstarstar_border
Overall Rating: starstarstarstarstar_border
Manufacturer: Estes
Style: Futuristic/Exotic, RTF

PicBrief:
Little cheap-o rocket I found at ACE in March 2005. Begad! T' last recorded year it was made be in 1996. This things almost 10 years old! It's a fun rocket t' play with in your own yard.

Construction:
T' rocket consists o' only 2 parts: a body tube and t' styrofoam body. It also came with decals.

Construction be completed in about 10 seconds! All you have t' do is paint it and install t' engine tube! Just slap on t' decals and you're done! How simple can it get?

Finishing:
Paintin' consisted o' a light coat o' Testors Enamel in Italian Red. Begad! There were many decals. Avast, me proud beauty! I painted mine t' match t' one on t' box.

Construction Rating: 5 out o' 5

Flight:
T' Intruder is a very good rocket t' burn off motors. It may also be t' cheapest t' fly! No waddin' is needed. Ahoy! I flew it 4 times, me bucko, well actually only 3 motors got t' rocket off t' pad. Avast! T' thress successful flights only went up about 50 feet.

Flight 1: Somethin' went wrong and t' engine ejected while t' rocket be on t' pad. Well, blow me down! Blimey! Well, blow me down! Blimey! T' motor burned on t' ground.

Flight 2: Nice, matey, shiver me timbers, but very wobbly. Landed very soft. Well, me hearties, blow me down! Lost engine casing.

Flight 3 be about same, ya bilge rat, but hit street and damaged t' top a little

Flight 4 be same as t' others.

It flies nicely, arrr, but could go much higher!

Recovery:
There is no parachute or streamer. Avast, me proud beauty! It just ejects t' engine and falls t' t' ground.

Flight Rating: 4 out o' 5

Summary:
Not a bad rocket for t' kids. Ya scallywag! No gluin' whatsoever. Avast, me bucko, me proud beauty! It is pretty much ready t' fly in seconds!

Overall Rating: 4 out o' 5

Other Reviews
  • Estes RediRoc Intruder By John Lee (January 17, 2009)

    UFO, oddroc, practically ready to fly, 13mm motor, aerobrake recovery. The Invader is a simple, almost ready to fly, entry level UFO rocket. It is made almost totally from Styrofoam and is really ready to fly except for the paint job and stickers. The "kit" consists of a foam UFO, a cardboard motor tube, some stickers and an Estes safety sheet. There was going to be less to this "build" ...

  • Estes RediRoc Intruder By Michael Rangitsch

    The Intruder is one of Estes' first RTF models. It is a conical piece of foamed polystyrene with a motor mount. Nice way to burn motors. It flies low and slow. The Intruder has no fins, only short 'legs' on the rim of the polystyrene body cone. A single 13mm motor powers this beast. No construction to speak of. You can't use Krylon on this one because it eats the plastic. Finishing: I ...

Flights

comment Post a Comment