Art Applewhite Rockets - Cone Rocket 18mm {Kit}

Art Applewhite Rockets Cone Rocket 18mm

Art Applewhite Rockets - Cone Rocket 18mm {Kit}

Contributed by Blake Eric DeMarcy

Construction Rating:
Flight Rating:
Overall Rating:

Manufacturer:

Art Applewhite Rockets

Brief:
This is a conical design offered by Art Applewhite. Arrr! Ya scallywag! It flies straight as any other rocket.

Construction:
When I got t' kit, me hearties, it had 2 body tubes. Arrr! One was 18mm and t' other was 19mm. T' kit also had 2 sheets o' cardstock, a piece o' foamboard with pre-printed markings, me hearties, ya bilge rat, 36 inches o' elastic, and instructions.

Construction is covered by t' above review.

Finishing:
You should spray a coat o' clear on your cone, but if you get gold like I did, this is nay needed.

Construction Rating: 5 out o' 5

Flight:
T' cone has flown 23 times t' date, but it seems, as hard as I try, me bucko, t' motor always kicks out t' mount. Avast, me proud beauty! Trust me, I try me best every time t' retain t' motor! T' cone is a great performer on C6 motors but is still cool on a B6 motor.

Recovery:
T' cone pops in two pieces held together by elastic. Avast, me proud beauty! Ya scallywag! Descent is slow and safe. Arrr! No waddin' needed. However, I will din' half a point because I can't keep t' motor in t' cone no matter how hard I try.

Flight Rating: 4 out o' 5

Summary:
T' cone is me favorite rocket and has held up well for all those flights. Begad! T' cone landed on a variety o' hard surfaces--asphalt, shiver me timbers, metal roofs, sidewalks, ya bilge rat, matey, ya bilge rat, even landin' on t' football goal once--and survived t' fly again. Buy one, you won't be dissapointed!

Overall Rating: 5 out o' 5

Other Reviews

Art Applewhite Rockets Cone Rocket 18mm By Nick Esselman (January 3, 2008)
Here's a new twist in Art Applewhite's UFO-series of rockets.... the Cone Rocket! I'm calling it a Cone UFO just to keep with the theme of what Art Applewhite Rockets seems to have a knack (and niche) in. This is the 18mm Orange version. There are also 13mm, 24mm, and 29mm versions in Stars & Stripes, Mirror Gold, Silver, Yellow and Texas Special. Also, in keeping with ...

Flights

Comments:

D.S. (August 2, 2003)

HEY, someone beat me to the punch! I built a 24mm cone and will submit a review once I get to a launch. I generally agree with Nick's construction rating, but will deduct a half point because the cone is harder to form that his saucers' shrouds, and I wanted to make a distinction. Now I'm thinking drag race if similarly sized and powered cones, Deltas, and standard saucers could be scraped up.

B.C. (September 29, 2003)

I was going to write a full review, but the EMRR review is so thorough mine would be mostly redundant, so here is a quick mini-review. Construction: This is my second Applewhite cone rocket, so I learned from my mistakes on the first one and did not have much trouble building this one. I absolutely agree with the EMRR review that a sharp knife is critical when cutting the bevels in the foam board. When building the inside nose cone, several parts need to be smeared with 5-minute epoxy and then fit together before it sets. Practice fitting the parts together before mixing any epoxy, because it sets up quicker than you think. I had a little trouble rolling my own thrust ring out of the provided card stock getting it to fit cleanly into the motor mount tube. I ended up using a standard engine block from another kit. Construction: 4.5 Flight: Flights were great, with lots of smoke trapped in the base vortex. Lower and slower than a conventional rocket, but much faster than most saucers. As noted, the ejection is very loud with such a small body to pressurize and ejection occurring so close to the ground. Flights: 5.0 Overall: Great value for the money.

Post a Comment