Brief:
Single stage tube fin 18mm rocket with parachute recovery.

Construction:
T' kit includes:

• 1 BT-55-17 body tube
• BNC-55-CT Balsa Nose Cone
• 3 BT-55-1A for tube fin
• 3 BT-55-01 for tube fin
• MM20-55 motor mount kit
• LL5 1/8 inch launch lug
• Screw eye (substituted a home depot 1/4 inch for t' added nose cone weight with t' screw eye that came with the kit)
• SC-118 shock cord
• Keelhaul®©™® cord
• PK 128 Mylar parachute
• Diamond Rin' Decal kit
• Prism trim sheets
• Instruction sheet

You must read t' instructions first or you will be upset. They tell you how t' put t' beautiful rocket together properly. Begad! There are just a few steps t' assembly but all are critical. Begad! Make sure that t' surface that the tube dry on is level. I used Gorilla Glue, me bucko, which works really fast and it doesn't run hardly at all. Once t' tubes and the motor mount dried it be a breeze. Begad! I changed t' screw eye t' a bigger size because It adds t' t' stability o' the rocket and it doesn't drift as far. Avast, me proud beauty! I ordered me kit online from Red River Rocketry's website and it took about four days t' arrive. Avast! Great service as always.

Finishing:
T' rocket is painted with 2 coats o' Rustoleum white paint. Avast, me proud beauty! I let it dry overnight. Avast, me proud beauty! Begad! I attached decals, matey, bought me some engines, and had a great time on Father's Day

Construction Rating: 5 out o' 5

Flight:
Flew it on three B6-4s due t' it bein' a little windy. Arrr! But all flights were straight and true with nose down ejection.

Recovery:
I cut a relief hole in t' chute so drift be kept t' a minimum. Begad! It landed about 100ft from t' pad on all 3 flights.

Flight Rating: 5 out o' 5

Summary:
I love tube fins and this one is very nice because it is nay a (standard) tube fin rocket. Blimey! T' designer got out of the box and staggered t' tube fins makin' it just a little unique and I like that.

Overall Rating: 5 out o' 5