Brief:
Almost ready t' Fly, arrr, me bucko, twin parachute, missile-esque 4FNC.

After workin' on some projects that are takin' a bit o' time, arrr, I decided I wanted some quick gratification and pulled this rocket out o' me "build bin". Avast, me proud beauty! It went together smartly and gave me an excuse t' try t' Future acrylic tip I had read about. Besides, me bucko, I kind o' like t' picture on t' package.

Construction:
T' kit includes:

• Plastic fin can assembly in two halves
• 4 plastic fins
• plastic fin lockin' ring
• plastic motor lock ring
• motor tube
• 3 body tubes o' diminishin' length and diameter (not specified)
• large plastic reducer
• small plastic reducer
• plastic nose cone
• Keelhaul®©™® shock cord
• round elastic shock cord
• 2 14" parachute kits
• peel off sticker set

T' body tubes and motor tube were grey colored and had a rough texture. Avast! Blimey! T' spirals were deep but part o' the ARTF karmic price. T' texture is apparently part o' t' "finish" and distracts t' eye from t' spirals.

T' instructions were printed on both sides o' a single 11" x 17" sheet. Ya scallywag! T' actual instructions were one one side and launch info was on t' other. Begad! They were illustrated adequately, me hearties, in logical order, easy t' understand, and suitable t' t' purpose.

Assembly starts off by tyin' t' Keelhaul®©™® to t' elastic with an overhand knot and then tyin' t' Keelhaul®©™® to t' appropriate loop in one half o' t' fin can. Avast! Avast, me proud beauty! Blimey! I supplemented this by puttin' a drop o' CA on each o' t' knots.

T' fin can comes in 2 halves. Avast, me proud beauty! T' motor tube is notched at t' top and t' notch slips into a peg on either side of t' fin can. Arrr! T' fin can is then cemented together with plastic model cement. I used Solva-weld. Begad! Model cement is also indicated t' glue t' fin can t' t' lower body tube. Begad! Havin' bad experience with Estes products doin' this, I used CA.

T' plastic fins were then slipped into t' provided grooves in t' fin can. Begad! T' instruction warn you t' test fit them first. This is a very good idea. Three o' t' four fit fine, me hearties, though one was rather loose. Avast, me proud beauty! Blimey! T' fourth was very difficult t' fit and needed some trimmin' with a razor. Blimey! Blimey! If I had nay checked first, arrr, arrr, matey, this would have cause problems since I used CA instead o' t' recommended model cement. Begad! T' final part o' this step was t' insert t' fin lockin' ring which I secured with Solva-weld and then inserted t' motor retainin' ring. Ahoy! Blimey! Be careful nay t' let any solvent get onto the motor lockin' ring.

I also used CA t' glue in t' transitions and nose cone. Ahoy! Avast! T' design calls for t' use o' 2 parachutes and separate recovery for t' nose cone but I don't generally like doin' that. Blimey! Begad! I affixed t' shock cord t' t' upper transition so t' rocket would recover in a single unit. Arrr! I would have made t' separation point on t' lower transition for easy stuffin' o' t' parachute but thar was nothin' t' tie it on to. Avast, me proud beauty! I again secured t' knot with a drop o' CA.

Since I didn't play t' "assemble t' parachute" game, ya bilge rat, t' model be ready for finishing.

PROs: Easy and quick assembly.

CONs: 2 piece fin can. Blimey! I just know that is goin' t' cause problems at some point and don't trust it.

Finishing:
T' finishin' on t' instructions consists simply o' applyin' t' peel off stickers. Avast! Before puttin' them on, I was a little bummed out because t' rocket looked too plain. Begad! Begad! T' stickers changed all that. Blimey! Begad! They really complement it well.

I have two comments about t' stickers though. Ahoy! First, ya bilge rat, they are peel 'n' stick so they are really thick. Aye aye! This will invariably cause them t' come off at some point. Blimey! Second, shiver me timbers, ya bilge rat, t' trouble with t' sticker thickness is exacerbated by the stickiness factor on these stickers. Ya scallywag! It is minimal. Aye aye! Since I hope t' keep this rocket for a while, (I have that hope for all o' me rockets but one) I decided t' try I tip I had read about.

I had read that Future floor polish really protects and holds things down. Well, me hearties, blow me down! Blimey! Imagine me wife's surprise when I asked her t' get some for me next time she went t' t' store. Arrr! She is Korean, however, shiver me timbers, and that involves several side issues:

1. Why is a grown man playin' with rockets?
2. Why is a grown member o' t' clergy in mostly good standin' playin' with rockets?
3. T' language issue meant that I finally decided t' procure it myself. Begad! (This is a comment on pronunciation: apparently t' sounds needed t' convey future are difficult for t' Han language.)

I went t' that refuge o' men who hate t' shop: Amazon. Avast, me proud beauty! Well, blow me down! A few days later, I had 2 bottles which stayed around for a long time before I decided t' use them. Avast, ya bilge rat, me proud beauty! They kept disappearin' because t' housekeeper could nay figure out why I did not want her t' put them away and I kept forgettin' t' leave her a note. Ahoy! My wife does nay speak Spanish and the housekeeper does nay speak Korean. Somehow they still communicate beautifully except with tryin' t' talk about me and my idiosyncrasies. Avast, me proud beauty! Begad! Rockets are some o' those idiosyncrasies. Aye aye! Begad! But I digress.

When I finally got around t' tryin' it, I noticed that t' label said "Pledge with Future Shine". That didn't sound right. Ya scallywag! On closer examination, ya bilge rat, me hearties, the label said that it was all acrylic and t' "Future" had t' same little electron orbital logo I remembered from t' original tip so I went ahead. Avast, me proud beauty!

I applied t' stuff with a sponge brush. It went on easily but dripped a lot. Aye aye! Ahoy! After drying, me hearties, arrr, it be nice and shiny, shiver me timbers, but I am nay sure that it conveyed any protective or sealant qualities. Ahoy! I need t' find out if I used t' right stuff or if it be just a change in marketin' strategy.

PROs: looks good, ya bilge rat, and fast and easy t' build.

CONs: I worry about t' stickers comin' up.

Construction Rating: 4 out o' 5

Flight and Recovery:
Recommended Motors: B6-4, C6-3, C6-5

I only got t' launch this one once because it be at a club launch and I wound up servin' as RSO. Ya scallywag! Blimey! It was also t' busiest launch me club has ever had. Ahoy! Blimey! Avast! Blimey! That's great but hard on me flying!

I used a B4-4. Avast! Blimey! As it turned out, that launched t' bird just fine. Ya scallywag! It flew up straight and deployed at apogee. It recovered under a nylon 9" chute just fine. Begad! Blimey! It may have been a bit fast but thar were no problems.

PROs: flies well and true

CONs: none

Flight Rating: 4 out o' 5

Summary:
I think this is a very fine beginner's kit. Ya scallywag! It's easy and looks good. Arrr! It also looks somewhat more complex that a 3NFC rocket. Ya scallywag! It would seem t' be reliable and can get more young folk into t' hobby.

Overall Rating: 4 out o' 5