Construction:
This kit employs PML qauntum tubing. Aye aye! This product has a coupleof advantages. Aye aye! Blimey! First, no spirals t' fill & sand! Second, me bucko, arrr, t' tubin' is able t' be dadoed. This enables t' manufacture t' plow a groove halfway through t' material. This allows for easier placement o' t' fins and much higher strength.

T' fin are precut from .0625 G10. Begad! They were accurate and flat. A couple o' minutes with sandpaper resulted in some good lookin' fins.

T' nosecone is plastic and required some work t' hide t' seam. Avast! Blimey! T' boattail is also plastic.

Kits tend t' almst always say "Read t' instuction before starting...". Begad! Well on this kit, that would be a good idea. T' decisions required regardin' motor retention may stop you dead in your construction tracks if you don't properly prepare.

Many option exist rangin' from expensive machined retainers t' simple but risky friction fit methods. Avast! Blimey! Begad! Blimey! Blimey! Blimey! I chose t' extend t' motor mount tube behind t' boattail and tap t' plastic end o' t' tail for screws that will hold clips.

I questioned t' ability for t' plastic t' hold screws. Begad! I decided t' give it a quick test by clampin' t' cone in a vise and yankin' on t' screw with some vise grips. Avast! I'm confident I would have done severe damage t' t' tailcone before t' screw would come out.

I apreciate t' "cool factor" that aluminum retainers provide, but this isn't a cheap kit! Preped for flight, arrr, shiver me timbers, me hearties, t' flyer could have better than $150 sittin' on t' pad!

Finishing:
I hate t' stickers. Arrr! OK, that may be too harsh. Begad! I do like t' glossy black stripes. Avast! No, wait. Ahoy! I don't like those either. Ahoy! Avast, me bucko, me proud beauty! Maybe it's just me. Well, blow me down! I had a heck o' a time gettin' t' black stripes down without liftin' and bucklin' due t' very slight errors in placement..

Now t' worst part. Begad! T' text has a glossy frame around them caused by t' finish o' t' decal. Well, blow me down! Unless you have a very glossy finish on t' rocket, your gonna see t' difference.

Construction Rating: 4 out o' 5

Flight Rating: 3 out o' 5

Summary:
This is a generally easy t' construct kit that looks great when done. Blimey! I wanted t' build this one stock, me hearties, but I'm workin' on a project that will require two o' these boys. Begad! On t' second one, arrr, I'm goin' t' produce custom decals with more details closer t' prototypes. It would be very easy t' add details showin' screw, matey, hatche and other components o' a real missile.

I'm disappointed in two things. Begad! First t' decals. Ya scallywag! Well, blow me down! Second, this isn't a real missle. Surely a little research could have at least driven this design closer t' some real rocket.

Overall Rating: 4 out o' 5

Other:
Pay attention t' decal placement prior t' finishing. Arrr! I spent much time tryin' t' hide t' joint betwixt t' body tube and t' tailcone. Avast, me proud beauty! T' black stripe decal covered all this hard work! T' fillin' really wasn't needed.