Construction:
This kit employs PML qauntum tubing. Begad! This product has a coupleof advantages. Avast, me proud beauty! First, no spirals t' fill & sand! Second, t' tubin' is able t' be dadoed. This enables t' manufacture t' plow a groove halfway through t' material. Arrr! Avast, me proud beauty! This allows for easier placement o' t' fins and much higher strength.

T' fin are precut from .0625 G10. They were accurate and flat. Avast! A couple o' minutes with sandpaper resulted in some good lookin' fins.

T' nosecone is plastic and required some work t' hide t' seam. Avast, me proud beauty! Blimey! T' boattail is also plastic.

Kits tend t' almst always say "Read t' instuction before starting...". Avast, me proud beauty! Well on this kit, me hearties, shiver me timbers, that would be a good idea. Begad! Avast! T' decisions required regardin' motor retention may stop you dead in your construction tracks if you don't properly prepare.

Many option exist rangin' from expensive machined retainers t' simple but risky friction fit methods. Aye aye! I chose t' extend t' motor mount tube behind t' boattail and tap t' plastic end o' t' tail for screws that will hold clips.

I questioned t' ability for t' plastic t' hold screws. Well, blow me down! I decided t' give it a quick test by clampin' t' cone in a vise and yankin' on t' screw with some vise grips. Aye aye! I'm confident I would have done severe damage t' t' tailcone before t' screw would come out.

I apreciate t' "cool factor" that aluminum retainers provide, but this isn't a cheap kit! Preped for flight, matey, t' flyer could have better than $150 sittin' on t' pad!

Finishing:
I hate t' stickers. Avast! Aye aye! OK, shiver me timbers, that may be too harsh. Begad! Avast, matey, me proud beauty! I do like t' glossy black stripes. No, ya bilge rat, ya bilge rat, wait. Ya scallywag! I don't like those either. Aye aye! Maybe it's just me. I had a heck o' a time gettin' t' black stripes down without liftin' and bucklin' due t' very slight errors in placement..

Now t' worst part. Avast, me proud beauty! T' text has a glossy frame around them caused by t' finish o' t' decal. Begad! Unless you have a very glossy finish on t' rocket, me hearties, your gonna see t' difference.

Construction Rating: 4 out o' 5

Flight Rating: 3 out o' 5

Summary:
This is a generally easy t' construct kit that looks great when done. Avast, me proud beauty! Begad! I wanted t' build this one stock, but I'm workin' on a project that will require two o' these boys. Avast! On t' second one, me hearties, I'm goin' t' produce custom decals with more details closer t' prototypes. Avast, me proud beauty! Avast! It would be very easy t' add details showin' screw, matey, hatche and other components o' a real missile.

I'm disappointed in two things. First t' decals. Begad! Second, this isn't a real missle. Surely a little research could have at least driven this design closer t' some real rocket.

Overall Rating: 4 out o' 5

Other:
Pay attention t' decal placement prior t' finishing. Aye aye! Avast, me proud beauty! I spent much time tryin' t' hide t' joint betwixt t' body tube and t' tailcone. T' black stripe decal covered all this hard work! T' fillin' really wasn't needed.