Public Missiles AMRAAM (3")

Public Missiles - AMRAAM (3") {Kit}

Contributed by Alex Seltsikas

Published: 2010-11-13
Length: 61.20 inches
Manufacturer: Public Missiles
Style: Scale
[NAR][Sport Rocketry]

T' followin' excerpt is from "Sport Rocketry".T' intention is t' allow guests t' get a basic feelin' about a kit.We strongly suggest that you get a copy o' t' referenced Sport Rocketry and read t' entire article. Inside you will find many helpful hints in construction as well as other useful information. Begad! Well, blow me down! For more information, use t' two links above.


(Sport Rocketry - Summer 1996 - page 31 - by Alex Seltsikas) 

[Picture]"T' instructions consist o' a single sheet o' paper with a series o' small diagrams on one side detailin' t' construction steps, and a diagram o' t' rocker together with t' letterin' and markings on t' reverse side." 
"PML's phenolic tubin' is excellent - heavy but really strong.  It comes pre-slotted. Ya scallywag! . Begad! ." 
"T' fins are made o' "G-10 phenolic". Aye aye! . . Begad! .They are completely rigid and very strong." 
"Other outstandin' features in this kit include an ejection piston . Arrr! Blimey! . ." 
"You get one o' PML's "Kwik Switch" mounts in the kit." 
"You get adapters t' scale down from 54mm t' 38mm t' 29mm." 
"T' kit slots together like a child's wooden jigsaw puzzle." 
"T' first flight was with a single-use Aerotech G80-3T and I wouldn't use anythin' less than that . . Avast! Blimey! ." 
"A fantastic kit - a joy t' build and fly." 

T' entire article gives t' impression is that this kit is a good value for beginners in high power rocketry.

"A note t' anyone who purchases our kits. Well, blow me down! If you ever have a fit or function problem with ANY o' our parts, me bucko, as was mentioned in this review, matey, it's easy t' fix...CALL US! We're committed t' t' best kits and customer service out there, matey, shiver me timbers, ya bilge rat, so if you have a problem contact us and we'll make it right. Avast! 810-468-1748, me bucko, M-F, me bucko, 9-5pm EST, arrr, ya bilge rat, or email ADWaddell@home.com." - Public Missiles Support Rep - Andrew Waddell

Flights

Comments:

avatar
A.M.C. (September 1, 1999)
IMHO this would make an excellent Level 1 kit. It's fairly easy to put together, looks great and flies wonderfully on an H128-S. It'll fly on a G75 so you could test before the cert flight.
avatar
L.M. (June 1, 2000)
I have flown the PML AMRAAM 3 on several sizes of motors from the I161 to the J570. With the J570 it went to 6800 ft. at near mach speed. It flew great every time with perfect recovery.
avatar
S.F. (January 1, 2001)
I found the directions to be straight forward and easy to follow, however I am very disappointed with the fit of the pieces. The outer diameter of the nose cone is noticeably smaller than the OD of the airframe. The coupler included with the kit is smaller than the ID of the airframe tubes, causing the rocket to not fit together well at the separation point. Plus it required considerable amount of masking tape to get the desired friction fit between upper and lower airframe.
avatar
C.M. (January 1, 2001)
I found the kit fun ( and easy) to build. A very strong kit. I have flown it on I-300 and 357 Motors. Perfect flight every time. It was my level 1 kit and might be my level 2. It is my all around sport flyer. PML has great kits plus other great goodies.
avatar
J.W. (January 1, 2001)
This was a great kit to build, and it looks beautiful when done. Flew on a I-211 down in Muncie. Looked and sounded great!!!

comment Post a Comment