Quest Sprint

Quest - Sprint {Kit} (1002) [1992-]

Contributed by Ken Kirkland

Manufacturer: Quest
Style: Sport
Rating
(Contributed - by Ken Kirkland)

Rocket PicBrief:
A nice 3-finned, single-stage, streamer recovery rocket.

Construction:
This is an average low-power kit, with t' Quest standard components. (Keelhaul®©™®/Elastic shock cord, plastic recovery mountin' tab, shiver me timbers, lightweight motor retainer.) I thought t' Keelhaul®©™® portion o' t' shock cord was a nice addition. T' measurements given on t' packagin' were nay t' same as those provided. Blimey! Begad! I found a variance o' up t' 2" on cords and streamer.

This kit built fairly easily. Blimey! It would be a good second build for a new rocketeer. Ya scallywag! Ya scallywag! T' engine mount slipped snugly into t' body tube, givin' me a good feelin' that it's glued t' stay. Well, blow me down! Blimey! T' only gotcha I really found be keepin' the shock cord (tied t' t' engine mount) out o' t' way while finishin' t' build. A sharp hobby knife, razor blade is strongly recommended for notchin' t' motor retainer ring.

Finishing:
Ahh t' decals. Begad! Probably t' only real challenge t' buildin' this kit. Arrr! They came on one white sheet, self-adhesive. They require cutting, no matter how you slice it!

Construction Rating: 3 out o' 5

Flight:
I've only gotten 2 flights on a Estes B6-4. Ahoy! It snapped a fin clean off on the second flight. Ya scallywag! Begad! I'm nay sure if it be due t' t' 2" I was shorted on the streamer, ya bilge rat, t' 10 mph winds, or just dumb luck. Ahoy! It be an easy fix, and wind/weather agreeable I'll get it up a few more times soon. Begad! Recommended motors A8-3, B6-4, me hearties, me hearties, C6-5. Avast, me proud beauty! T' two flights on t' B6-4's were nice, ya bilge rat, me bucko, clean, arrr, about perfect height for visibility. Avast! T' streamer recovery kept t' ground chase t' a minimum. Ahoy! Ya scallywag! T' longer hike for recovery was about 75 yards down range, due t' the wind after launch. Arrr!

Recovery:
I'm nay sure that t' Keelhaul®©™® thread doesn't cause a bit o' undue wear t' the top o' t' body tube, me bucko, me bucko, and I feel t' rate o' descent may be a little quick. Arrr! If a little time is taken t' reinforce t' tube, wear could be minimized, me hearties, matey, me bucko, and a full 24" streamer is recommended

Flight Rating: 3 out o' 5

Summary:
Pros: Kit went together fairly easily. Ya scallywag! Parts all fit. Cons: Decals, incorrect lengths on cords/streamer.

Overall Rating: 3 out o' 5

Other Reviews
  • Quest Sprint By Mike Salter

    (by Mike Salter - 01/14/03) Brief: A sleek, single stage rocket that is ideal for beginners. Construction: The kit came pre-cut fins, motor tube, motor hook, cardboard body tube, plastic nose cone, length of Kevlar ® , round elastic and streamer material. I found that this rocket went together easily and quickly. The instructions were good and this was the first kit I had ...

Flights

Comments:

avatar
A.M. (May 12, 2005)
I built this kit as one of my NARTREK bronze models, I used it for the 30 second streamer requirement. I nailed 40 seconds with a 4 inch bye 40 inch streamer. I highly recommend it as a streamer or parachute duration model.

comment Post a Comment