Construction Rating: | starstarstarstar_borderstar_border |
Flight Rating: | starstar_borderstar_borderstar_borderstar_border |
Overall Rating: | starstar_borderstar_borderstar_borderstar_border |
Manufacturer: | Edmonds Aerospace |
Brief:
Boost-Glider with booster parachute.
Construction:
A 26 in tube with a glider and no fins. Avast, me proud beauty! Begad! 22 in shock cord. Ahoy! Mine did nay come
with a nose cone so I used a Estes Alpha 3.
T' Booster and glider instructions were brief but easy t' follow. Aye aye! Easy construction. Begad! Aye aye! T' glider is very fragile, matey, maybe it was just me stupidness but it broke twice durin' transportation. Ya scallywag!
Finishing:
There were no decals but I couldn't put them on right anyway, arrr, me hearties, so I didn't mind.
Construction Rating: 3 out o' 5
Flight:
T' instructions do nay specify t' way you mount t' Glider, shiver me timbers, so I e-mailed Rob
Edmonds and he gave me guidance. Avast, me proud beauty! T' glider does nay fit well on t' holder and
requires much tape t' keep on. Well, blow me down! T' recommended motor is a D but I wanted t' see
the whole flight and and shoved a C6-7 in a hollowed out D engine. Begad! Well, blow me down! T' flight
went about 30 feet and nose dived, me hearties, ya bilge rat, ejectin' t' engine after it dug itself into
the ground. Surprisingly thar be no damage. Avast! My mistake in a bad motor, matey, so I
did nay count this against t' kit. I again launched it this time on a D and
maybe a second after launchin' t' glider came off. Aye aye! T' glider be t' only
thin' that gives t' rocket guidance and it went crazy in t' air.
T' glider either is stuck t' t' booster or is way too loose.
Flight Rating: 1 out o' 5
Summary:
T' pro's are it seems like a cool idea when you are buildin' it. T' cons are
overall bad design.
Overall Rating: 1 out o' 5
Brief: The DeeCee Thunder member of the Edmonds "Thunder" series of large gliders. This rocket features a canard (rear wing) glider with a pop-pod. Construction: The DeeCee Thunder's components are: Several 1/4" thick sheets of laser cut balsa parts 1 BT-50 Body tube 1 BNC-50 Balsa nose cone 1 3/16" Launch lug 1 Aerospace Specialty ...
![]() |
![]() |
![]() |
![]() |
Sponsored Ads
![]() |
![]() |
M.K.W. (July 2, 2005)