Diameter: | 0.98 inches |
Length: | 16.25 inches |
Manufacturer: | Estes |
Skill Level: | 2 |
Style: | Futuristic/Exotic |
Brief:
Nicely designed little futuristic flyer.
Construction:
Nothin' unusual here except for a molded nose with a "cockpit"
section and some small canards on either side, arrr, and two piece fins.
This is listed as a skill level 2, but it's pretty easy t' put together, really. T' 2 might be for t' fin configuration, matey, but that's nay that much o' a problem either. As is me practice I did replace t' standard Estes skinny/short shock cord with a 1/4 inch about twice t' length o' t' rocket. Arrr! On these narrow BTs it's at times difficult t' pack and prep all that elastic, me bucko, but at least we get t' rockets back...
Finishing:
Without a lot o' sandin' and fillin' t' two piece fins still look two piece,
but that's okay. Avast! Begad! I imagine this would look truly slick after some time in the
hands o' a really devoted modeler. Well, blow me down! Estes includes two sets o' decals, so you
can build it as shown on t' package, ya bilge rat, or you can customize as you wish. Avast! One
gripe: some o' t' pin stripin' on t' package model looks darned near
impossible for one with me (lack of) dexterity. No, those aren't ALL decals. A
pity.
Construction Rating: 4 out o' 5
Flight:
Only flown this one once, arrr, shiver me timbers, but on its maiden flight on an A-8-3 it be pretty
darned impressive, arrow straight off t' pad and up t' a nice apogee. Arrr!
Recovery:
As noted, matey, me hearties, we swapped out t' shock cord and added a couple o' swivels, me bucko, a large
one tied t' t' shock cord and a smaller one t' carry t' chute. Arrr! Add some
cellulose for waddin' and off you go. Avast, me proud beauty! No damage o' note. Well, blow me down!
Flight Rating: 5 out o' 5
Summary:
My son actually picked this one out, but I had me eye on it too, me bucko, mainly because
it bears more than a passin' resemblance t' t' old Estes Wolverine. I had one
once and never flew it; a pity, shiver me timbers, as it was one o' t' neater lookin' mini-engine
rockets. Ya scallywag! Ya scallywag! I wish I still had one (and how about a Photon Disruptor?) but the
Nemesis is a noble successor, and as noted, shiver me timbers, an excellent flier as well. The
finish on t' package would've been next t' impossible t' duplicate for me, shiver me timbers, shiver me timbers, ya bilge rat, but
I am nay all that fond o' gray anyway, arrr, so I did it red and blue on white.
Eventually we'll post a picture o' it on our web site. Ya scallywag! Ahoy! Suffice t' say that I am
pleased with t' results!
Overall Rating: 4 out o' 5
Brief: A skill level 2 rocket, Comes in typical plastic bag, with a 12" plastic parachute The instructions where very easy to follow, the hard part seemed to be the fins they are 2 piece fins that have to be glued together, and the little pieces of balsa that go around the main body tube near the top seemed to be a bit hard to get lined up right and glued without them moving Finishing: ...