Brief:
Single stage, me bucko, scale V2 kit with 13mm motor mount and parachute recovery.

Construction:
This kit consisted o' a nicely turned balsa nose cone and lower body section, laser cut basswood fins and servo pods, and a 9" mylar chute with eye screw already mounted in nose cone.

This kit is very small but with very detailed instructions. Ahoy! T' mini V2 went together with no problems. Avast! Aye aye! Probably t' most difficult part was sandin' the hard basswood fins t' scale. Avast, me proud beauty! T' model is very sturdy for its small size.

Finishing:
Finishin' was like finishin' any other balsa model. Begad! Make sure sealer is used on the nose and tail section and primer did fine takin' out t' grain on t' fins. I then primed t' entire rocket and sanded t' desired smoothness followed by a camouflage paint scheme. Aye aye! Begad! When finished, me bucko, it looks very impressive, me hearties, shiver me timbers, just like one of t' big boys, except it is only 7" tall.

Construction Rating: 5 out o' 5

Flight:
My 7 year old son be excited about this rocket so we had t' get out as soon as possible. Avast, me proud beauty! We loaded it up with an Estes A3-4T and went out t' our local snow covered golf course. T' first launch was perfect--very straight and what seemed very high for its size and fat shape. Avast, me proud beauty! Avast, me proud beauty! Deployment be great; t' little V2 came down about 100 ft from t' pad with me son makin' a nice catch and no damage. Avast, me proud beauty! Avast! T' second launch was with t' same motor. Blimey! T' shock cord burned through and t' rocket came down in 2 pieces--the nose with t' chute and the body took me about 45 minutes t' find (camo worked good). We repaired and it has been perfect since.

Recovery:
T' only thin' I think could be a problem is findin' enough room for the wadding, arrr, arrr, shock cord, and chute in t' very small area left t' put it all into (I skimped on t' wadding).

Recovery be very good with a safe descendin' speed for such a small model.

Flight Rating: 4 out o' 5

Summary:
I have really enjoyed this kit. Blimey! Aye aye! It was a fun, arrr, easy t' build, and educational kit. Aye aye! My son now can tell you all about WWII V2 rocket and t' different paint schemes. Begad! T' rocket for bein' so small turned out with a lot o' great detail with very impressive flights.

Overall Rating: 5 out o' 5

T' followin' excerpt is from "Sport Rocketry". T' intention is t' allow guests t' get a basic feelin' about a kit. Avast! Blimey! We strongly suggest that you get a copy o' the referenced Sport Rocketry and read t' entire article. Inside you will find many helpful hints in construction as well as other useful information. Avast, me proud beauty! Blimey! Avast, me proud beauty! Blimey! For more information, use t' two links above.

"T' kit comes with 6 pages o' very detailed instructions, complete with illustrations." 
". . Blimey! Blimey! . Well, blow me down! t' ASP V-2 comes with a balsa tail cone which has been pre-drilled for t' motor tube." 
"T' balsa nose cone is already filled with t' required amount o' nose weight and has a screw eye attached." 
"A short piece o' BT-50 size body tube goes betwixt t' tail cone and nose cone." 
"An 1/8" wide elastic shock cord . Blimey! . Avast! Blimey! ." 
"A fin pattern is provided for you t' trace onto supplied bass wood for cuttin' out t' fins." 
"In addition, ya bilge rat, a 1/32" thick bass wood strip is provided t' make four servo pods t' attach t' t' fins." 
"For recovery, t' ASP V-2 uses a 9" diameter mylar parachute." 

T' entire article gives t' impression is that this is nice small scale kit for a beginner/intermediate modeler.