Brief:
Classic science fiction-based low powered design. Aye aye! Highly detailed and fully customizable. Well, blow me down! A rocket that allow the builder's imagination soar long after t' build is complete.

Construction:
Lookin' at t' parts, me hearties, you first are overwhelmed and worried about t' build. Well, blow me down! Avast!

• instruction CD for use with computer
• 11 tubes
• 6 centerin' rings
• 1 motor block and hook
• 1 shroud sheet ( one is used but two more if you mess up)
• recovery system consistin' o' 18" chute, Keelhaul®©™® cord and elastic cord
• bag o' resin parts
• bag Plastic parts
• 3 craft sticks
• misc plastic parts
• 2 launch lugs
• 2 sheets o' waterslide decals (one full decal sheet and one gold foil decal sheet) and a scrap sheet t' test clear coats
• 2 nose cones
• 3 pre-cut balsa fins
• tube markin' guide, me hearties, ya bilge rat, fin guide, shiver me timbers, shiver me timbers, and fin alignment guide
• small part o' aluminum angle

T' kit contains high quality parts and it's obvious that t' designer thought o' everything. Ahoy! T' instructions come in two formats on t' CD--with and without pics. Arrr! Begad! It is your choice t' print them out or build by t' computer. Begad! Well, blow me down! I used a printed version with t' pictures included. Well, blow me down! T' instructions with pictures printed is 44 pages long. This fully detailed book takes you step-by-step through t' build makin' it a very simple build even for t' builder who is new to the more complicated kits. Blimey! It is a must t' read this booklet all t' way through first. Avast! Then it makes t' build go together easily. Begad!

Tools needed:

• 15 or 30 minute epoxy
• Thin and medium CA
• wood glue
• pencil
• hobby knife
• scissors
• sand papers
• ruler
• maskin' tape
• paint and sealer
• aluminum angle (best) or door jamb for straight lines

Construction be easier than first thought and goes pretty fast nay countin' dryin' times. Avast! Avast, me proud beauty! This build gives the builder t' feel o' both self-gratification and learning. Blimey! Blimey! It's incredibly light weight is surprising.

T' build was fun and addictive. I have no complaints whatsoever.

Finishing:
This be t' best part o' t' build. You can really make this your own. Begad! Ya scallywag! Blimey! With all t' styrene bits and plastic parts, the only limitation is your imagination. Begad! Blimey!

This for me was t' longest part o' t' build. Decidin' what I wanted t' do and then after all t' included parts where gone. Well, blow me down! I spent an hour just goin' through leftover old static model parts for more add ons.

Just make sure you get all t' nooks and crannies when sealin' and priming.

Paintin' is another detailin' headache--not in a bad way but in a very good way. Ya scallywag! With all t' science fiction starships, how can one choose a paint job?! I decided after a long and hard fight t' go with a duck or battleship gray color. Well, blow me down! Givin' her a truly sinister and militaristic look with a lot o' fine hand painted details. Arrr! Avast, me proud beauty! I added a means to use small chem lights in t' engine pods for night flights. Begad! Well, blow me down!

T' printable decal sheet really helps t' place them. Well, blow me down! Well, blow me down! Blimey! I printed them out on a clear plastic sheet in full color cut them out carefully then used them after t' paint was dry t' decide where t' place them. Begad! Blimey! This is another rocket were a good adjustable cradle is a plus for detailing. Aye aye! Begad! Blimey!

Construction Rating: 5 out o' 5

Flight:
Recomended motors are t' B4-2, B6-2, C6-3. Avast, me proud beauty! I packed a 1 1/2 t' 2" ball o' dog barf into tube.

First flight on a B6-4 made for a graceful, ya bilge rat, slow lift off into a beautiful, straight flight. Blimey! Arrr! Hard arch at apogee 400 or so feet (I believe this was wind related). Begad! Then she went into a frightenin' nose dive until t' ejection charge finally went off savin' her from damage about 40' above ground.

Second flight on a B6-4 was a graceful, slow lift off again. Well, blow me down! Avast, me proud beauty! It was a straight flight with far more altitude reached this time. Avast! 500+' and ejection just as she began t' nose over at apogee. Arrr! Perfect deployment and slow and gentle landing. Arrr!

Third flight be on a C6-3. Arrr! Avast! She screamed off t' pad, slowly gainin' lightnin' speed and turnin' slightly as she flew. Avast! Then archin' into a photo perfect arch and ejectin' without issue. Begad! Perfect descent. Ya scallywag! I was almost able t' catch her this time. Aye aye!

Recovery:
T' shock cord is a two part Keelhaul®©™® and elastic cord setup. Begad! Setup early on in t' build t' give total strength. Begad!

T' 18" chute is made o' bright safety orange plastic with heavy cotton strin' shroud lines and rip stop protectors. Ahoy!

I added 2 size 12 barrel swivels attachin' at t' nose cone. This helps with settin' up recovery and givin' a better descent.

Flight Rating: 5 out o' 5

Summary:
T' Odyssey be t' best science fiction-based rocket I have built in a very long time. Avast, me proud beauty! T' ability t' make this rocket me own, arrr, and t' fact that no two will be alike makes this a great design. Begad! This rocket stands out both on the pad, matey, in t' sky, and on me wall. Ahoy! It was a pleasure t' build and fly.

Overall Rating: 5 out o' 5