T' followin' article was a submission t' t' FlisKits, arrr, Inc Deuce-Bash Contest and is archived with permission from FlisKits. Ya scallywag! Blimey! Some o' these designs are nay actually kitbashes, shiver me timbers, however, shiver me timbers, ya bilge rat, all come from t' basic motor design feature of t' FlisKits Deuce's Wild.

Brief:
Parts List:

• 1 Deuce Engine Kit
• 1 BT-60 Body Tube (2 1/4" long)
• 1 7.25" Art Applewhite Saucer

I started out buildin' t' motor mount per t' instructions and mounted inside t' BT-60 body tube. Ahoy! Blimey! I then built the Art Applewhite saucer per t' instruction with one exception: t' three center fins need t' have .330 inch taken off o' t' root edge. Begad! Avast, me proud beauty! Blimey! When you attach t' center fins, shiver me timbers, make sure they are even with t' top o' t' body tube, shiver me timbers, this will help maintain stability. I finished with red paint and TripleThick Glaze.

T' saucer has flown twice. Ahoy! Avast, me proud beauty! Once on two B-6s and once on two C-6s. Begad! T' C motors seemed to work better. Blimey! Nice slow tumble recovery and landed within 30' o' t' pad each time. This be a very simple bash and was done within three days.