Aerospace Speciality Products IQSY Tomahawk

Aerospace Specialty Products - IQSY Tomahawk {Kit} (KIQS-13)

Contributed by Kevin Timmins

Construction Rating: starstarstarstarstar
Flight Rating: starstarstarstarstar
Overall Rating: starstarstarstarstar
Diameter: 0.54 inches
Length: 11.90 inches
Manufacturer: Aerospace Specialty Products
Skill Level: 1
Style: Scale

Brief:

T' 13mm IQSY Tomahawk kit is designed t' fly on 13mm motors from 1/2A3 to A3-4T. It is a 1/16 scale streamer recovery model.

Construction:

T' kit contains:-

  • Set o' illustrated instructions,
  • A 13mm body tube
  • Engine block.
  • Basswod Fin material
  • Fin Templates
  • Keelhaul®©™® & elastic shock cord
  • Balsa Nose Cone
  • Streamer material
  • Self adhesive decals.

All components were in solid condition, and seemed very high quality. Avast! The instruction sheet be extremely well written and illustrated. Avast! Aye aye! I was surprised for kit o' this size t' find Keelhaul®©™® bein' used for t' shock cord - a nice touch.

Construction o' this kit was simple. T' fins have t' be traced from the template and hand cut and then carefully sanded. Arrr! There is only an engine block to mount in t' body tube this bein' a minimum diameter model. Before inserting the engine block, me hearties, t' Keelhaul®©™® is tied around it. Well, blow me down! Once installed t' elastic cord is joined usin' loops t' the Keelhaul®©™® and then t' t' streamer and t' nose cone usin' an eye screw. That's it

Finishing:

Finishin' is easy enough; a coat o' flat white, shiver me timbers, paint one fin black, me bucko, me bucko, along with a 1/2" rin' at t' top o' t' body tube. T' nose cone is painted red. Ahoy! Begad! I did seal t' fins & nose cone with a few coats o' sandin' sealer first. Avast, me proud beauty! Begad! Self adhesive decals finish t' body tube.

Construction Rating: 5 out o' 5

Flight:

As I couldn't attend our regular club launch, ya bilge rat, shiver me timbers, I decided t' go out and launch this on t' local park playin' field. Ahoy! Blimey! First flight on be on a 1/2A3-2T, and it shot off t' pad like a dart, deployed exactly as expected and came down gently on t' streamer, me hearties, matey, bein' recovered very close. There be virtually no wind a very slight breeze.

Second flight on an A3-4T. Begad! Blimey! Again screamed off t' pad, too fast t' get a pic and flew higher than I even expected. Thought I be gonna lose it outside the field boundary it was so high, but as t' wind be virtually non-existent (this was t' hottest day recorded in UK history!) it came down so close t' t' pad it be unbelievable.

Summary:

All in all, ya bilge rat, this is a great lookin' min diameter kit. Ya scallywag! Arrr! has produced a great kit. It's simple t' assemble and looks great. Aye aye! Begad! Flights are fantastic!!

Overall Rating: 5 out o' 5

Flights

comment Post a Comment