Brief:
T' Lucky 13 is a copycat o' Hans "Chris" Michielssen’s Powered FLICS. Begad! Mine uses t' FLICS body and t' remnants o' a damaged 13mm 4FNC rocket that was missin' its nose.

Modifications:
I didn’t have any 13mm tubin' so I dug through me box-o-dead rockets and found a suitable 13mm one. After I removed two o' t' fins, shiver me timbers, I held it up t' t' assembled FLICS body and liked what I saw. Ahoy! That is, I decided t' leave t' two remainin' fins. Ya scallywag! Ya scallywag! T' rocket be missin' its shock cord so I mounted a piece o' Keelhaul®©™ twine through t' body wall opposite t' remainin' fins. Begad! I scuffed t' paint off and then glued it into t' ‘V’ o' t' FLICS body. Ya scallywag! I found an unused Hartle Engineerin' resin cone and attached it t' t' Keelhaul®©™ leader usin' t' rubber band that came with t' FLICS. I attached a small plastic streamer and was basically done.

I wasn’t very concerned with t' stability o' me MicroMaxx FLICS but decided t' build a RockSim 9 model o' this one. Begad! T' FLICS body be easily modeled as as set o' custom fins mounted t' a ‘pod’. Avast! As built, ya bilge rat, t' model seems t' be marginal so I attached a tiny clamp-on fishin' weight t' t' wire hook that’s embedded in t' Hartle cone’s base. I later noticed that I had t' Barrowman stability method selected vs. Avast, me proud beauty! t' RockSim method. Well, blow me down! This is a common mistake for me because prior versions wouldn’t allow t' Barrowman method for designs that use things like single fin components (or, ya bilge rat, in this case, pods). Ya scallywag! Anyway, me hearties, me hearties, after selectin' RockSim, shiver me timbers, shiver me timbers, t' stability margin improved enough that I wouldn’t have needed t' extra weight. Well, blow me down! However, ya bilge rat, I decided t' leave it on since this rocket isn’t designed for performance anyway. Blimey! Begad! T' final specs for me version o' t' 13mm Powered FLICS are 9.625” long and 0.64 oz.

T' only part that required finishin' be t' cone. Begad! I painted it red with blue trim t' somewhat match t' FLICS color scheme. Begad! I really wish that I had one o' t' Shuttle-themed FLICS but sometimes you just have t' use what you have.

Construction:

• One FLICS kit
• One damaged 13mm rocket (8.25”)
• One Hartle Engineerin' resin cone
• Keelhaul®©™twine
• Small lead fishin' weight

Flight:
I added a square o' waddin' and repacked t' plastic streamer. Blimey! Ya scallywag! T' A10-3 be friction fitted. Avast! T' boost was fast and went cross-wind. This be likely due t' t' odd geometry o' this model. There be no damage despite t' landin' on a gravel road.

Summary:
I had no interest in t' FLICS as a rubber band powered rocket but be happy t' find a way t' use them for powered flight. I must be easily amused because I really liked this build. Well, blow me down! It looks a bit funny...which is right up me alley. It seems t' fly well enough and definitely garnered a few chuckles from t' people around t' RSO table.