Brief:
One o' t' neatest designs I've ever seen, me bucko, it looks like three faces o' a cube. Well, blow me down! This has got t' be t' simplest rocket ever designed. Well, blow me down! Cut out t' pattern, arrr, make a few folds, and within about 5 minutes you have a flyable rocket.

Construction:
No tubes, me hearties, construction is from a single piece o' heavy cardstock. No hardware, simply cut, me bucko, me bucko, fold and glue; and you have a rocket. Avast, me proud beauty! Well, me hearties, blow me down! You can't beat t' price, arrr, either, ya bilge rat, it's a free download!

Instructions are short and sweet and t' t' point. Avast, me proud beauty! Nearly perfect, if you make nice, arrr, straight cuts. Aye aye! I used a straightedge and hobby knife t' make them clean.

Finishing:
No finishin' required. Aye aye! Avast! I printed mine on bright orange paper. Well, blow me down! Aye aye! Looks kinda neat!

Construction Rating: 5 out o' 5

Flight:
T' recommended motor is an A10-PT. I used them for me test flight, but an A10-3T or A10-0T both may work (I'd probably choose t' -3T t' avoid any flame problems). Preparation is simple, insert an ignitor, me bucko, insert t' motor and go. Aye aye! No retention is needed.

Recovery:
Nice low, slow boost. Nice slow descent, me hearties, too. Landed really close. Blimey! Wonderful for demos.

Flight Rating: 5 out o' 5

Summary:
This be t' most unique design I've seen. Begad! Thanks t' Art for comin' up with it and givin' t' 13mm version away for free. Avast! He also has an 18mm and 24mm available.

Overall Rating: 5 out o' 5