Brief:
A single-staged D-powered scale representation o' t' Space Transportation Corporation's entry in t' competition for t' Ansari X-Prize.

Construction:
T' rocket kit consisted o' a 24mm motor mount tube, arrr, a motor block ring, arrr, arrr, a motor retainer hook, a thick stage coupler-like hook retainer ring, six tank tubes, ya bilge rat, a large main body tube, a truly massive blow molded plastic nose cone, me hearties, a set o' six plastic fins, me bucko, ya bilge rat, me bucko, a plastic fin canister, a plastic bulkhead, matey, an assembled plastic 18" parachute, a set o' six plastic nozzles, matey, a big die-cut cardstock centerin' ring, ya bilge rat, a sheet o' pressure sensitive decals, and a 30" x 1/4" rubber shock cord. Arrr! I bought t' kit at Hobby Lobby in Killeen, shiver me timbers, Texas. All t' parts were included in t' kit--no broken ones were found.

Estes sent an update sheet with t' instructions t' replace t' first three steps in t' instruction sheet. Begad! It would nay have gone together at all well if the original instructions had been followed. Begad! This rocket is as solidly built as any Estes product I have ever seen. T' temptation t' go back and get another one and build it for "E"-size motors is significant...

It was easy and quick t' build. Begad! Blimey! Ahoy! Blimey! I started it at 8am and finished it except for paint by ten! Blimey! I added an 18" length o' 1/8" round elastic cord to the existin' rubber band. Aye aye! Blimey!

PROs: solid plastic parts, Estes on t' ball with instruction update. Ya scallywag!

CONs: typical too short length o' shock cord. Begad!

Finishing:
Rubicon has a slightly complicated multicolor paint scheme, but it's nay really that bad. Aye aye! Lines betwixt colors match up neatly with lines betwixt parts. Begad! Aye aye! This model is well thought out t' be fairly easy t' paint too. Blimey! I did most o' mine with a brush and Testor's acrylics. Ya scallywag! I felt that t' tank tubes were pictured as black and t' nose cone and fins were pictured as red, so me paint scheme is not exactly as described.

I also prefer waterslide decals t' t' stickers Estes is usin' these days, as t' waterslide decals can be positioned more easily than stickers with less risk o' bubbles. Avast, me proud beauty!

Construction Rating: 4 out o' 5

Flight:
T' Rubicon's recommended motors are t' D12-3 and D12-5. I flew it on D12-3s.

It was easy t' prepare for flight. Ya scallywag! Lots o' parachute space in that 3.21" diameter main body tube! I stuffed four squares o' Estes wadding down t' motor mount tube and laid two more on top o' it. Begad! Aye aye! T' typical Estes motor retainer hook was t' method used on t' Rubicon. Blimey!

If I had been a little more inclined t' make minor modifications, matey, I would have installed t' shock cord differently. Arrr! Arrr! It seems t' me that drillin' two 1/4" holes in t' uppermost centerin' rin' and tyin' t' cord thar would result in a better setup than t' usual paper mount.

Recovery:
Estes should make 20" parachutes. This rocket falls into t' slot o' too heavy for an 18" chute and nay heavy enough for a 24" one. Avast, matey, me proud beauty! Blimey! It is fortunately sturdy enough t' land under an 18" chute and take no damage, even on concrete!

Flight Rating: 4 out o' 5

Summary:
Another well-done X-Prize contender.

PROs: solid construction, excellent plastic parts, a headline-grabbing subject.

CONs: none worth mentioning.

Overall Rating: 4 out o' 5