Brief:
T' LOC/Precision Iris is a 3" diameter single stage rocket. Blimey! Blimey! Aye aye! Blimey! It can be built as 1/4 size sport scale Iris rocket. Well, me hearties, blow me down! Blimey! Recovery is via a 36" parachute. Blimey! Blimey! I modified it t' use electronics for dual deployment.

Modifications:
I built everythin' stock except for t' deployment/recovery method. I converted t' coupler t' an electronics bay. Blimey! Avast! I built this by addin' another bulk plate assembly and a coupler tube stiffener, also purchased from LOC. Aye aye! I cut t' stiffener down so that each end be recessed 1/4" from t' edge. This allowed room for t' bulk plates t' fit in. I drilled two matchin' holes in each bulk plate for #10-20 threaded rod t' go through. Begad! I put win' nuts on t' ends o' t' threaded rod t' pull t' bulk plates tight against t' stiffener tube. Aye aye! T' electronics sled had a 1/4" tube glued t' it that slid onto one o' t' pieces o' threaded rod. Ahoy! (I should have made it go over both pieces though.) I cut a 3/4" piece o' body tube and glued it in t' middle o' t' coupler. Arrr! This allowed me t' permanently mount t' armin' switch, which from Newton's 3rd Rocketry. Ya scallywag! Well, blow me down! It be also a good place for t' static port hole. Avast! Begad! This e-bay design, ya bilge rat, usin' t' included coupler had plenty o' room for me Perfectflite HiAlt45K.

I used some tubular nylon that I already had for both sections. Well, blow me down! T' lower half attached t' a 1/4" eye-bolt screwed into t' motor's forward closure.

Construction:
T' box contained 2 sections o' 3" diameter body tube. Ahoy! Avast, me proud beauty! One o' them be pre-slotted. Avast! Begad! There were two 1/8" 5-ply centerin' rings, and four 1/8" 5-ply fins. Begad! Avast! T' rest o' t' parts included a 38mm motor mount tube, elastic shock cord, me bucko, shiver me timbers, 36" parachute, ya bilge rat, plastic nose cone, 3" tube coupler, and a bulk plate assembly.

Finishing:
I didn't put much effort into finishing. Aye aye! T' decals that came with it appeared t' be homemade and sprayed with clear coat. Begad! I decided nay t' use them and originally planned t' paint it close t' one o' t' paint schemes o' t' real Iris. I didn't do any finishin' work on t' tubes or fins other than a little sanding. Avast, me proud beauty! Arrr! I applied two coats o' white primer and two coats o' white gloss paint. Avast! This was all I could get done before t' launch. Ya scallywag! I had planned t' do more later.

Flight:
Both flights were fast and straight. Ahoy! Each flight was was powered by a J motor usin' DPS SRB propellant. Ahoy! Avast! T' first flight reached an altitude o' 4212 feet. Arrr! T' rocket was destroyed on t' second flight.

Recovery:
Recovery for t' first flight was perfect. Blimey! At apogee t' first charge fired, arrr, me bucko, separatin' t' two main sections which were tethered by 25 feet o' tubular nylon. Blimey! T' second charge ejected t' parachute at 400 feet.

T' second flight suffered a failure o' some sort in t' electronics. Blimey! I think it was more me failure in how I mounted t' electronics and nay t' manufacturer. Begad! Ya scallywag! Neither charge fired, me bucko, and I suspect thar was a power disconnect. Begad! I was careless in how I mounted t' battery and think it might have come loose or jarred t' altimeter. Blimey! Ya scallywag! I also should have mounted t' sled over both pieces o' threaded rod t' keep it from rotating. Avast, me proud beauty! I had added some foam underneath t' sled but don't think it helped much. Aye aye! Ya scallywag! Almost everythin' be destroyed when it hit t' ground. Blimey! T' parachute, motor hardware and fins were OK. Avast! T' rest o' t' rocket was unrepairable as well as t' altimeter and Beeline transmitter.

Summary:
PROs: I think t' LOC/Precision Isis is a great rocket. I would like t' build another one some day. Aye aye! T' parts were extremely good quality. Begad! Ahoy! Blimey! T' instructions were easy t' follow. Well, blow me down! Well, blow me down! Blimey! It flew great. Ya scallywag! Blimey! Also, because o' t' dimensions, me bucko, I had t' option t' make a sport-scale Iris.

CONs: T' only issue I found be t' pre-made slots did nay appear t' be perfectly spaced from one another. Ahoy! Begad! I was able t' work around this.