Brief:
An affordable and easy way t' add 2 stage capability for t' Centauri, Super Centauri, arrr, Toob-oh, me bucko, and Super Toob-oh model rocket.us kits and other BT-50 based rockets. Avast! Sister t' t' ring-finned Boostoh stagin' kit. Well, blow me down! Avast! Availalble also in RTF form.

Construction:
T' kit consists of:

• a laser cut booster section o' their special .988 dia BT-50 sized body tube,
• laser cut fins, shiver me timbers, me hearties,
• centerin' rings, shiver me timbers,
• metal engine hook,
• engine block,
• instructions,
• laser etched 18mm engine tube.

Pros:

Instructions: T' instructions included with t' Boostar-C are concise and easy t' read and follow. Arrr! Arrr! They appear t' be written in plain language that a fourth grader can understand, shiver me timbers, with bold print and line illustrations in black and white. Blimey! They also include a fin alignment guide t' help in installin' t' through-the-wall fins.

Ease o' Build: I be surprised and pleased at t' manufacturin' quality o' t' kit parts. Everythin' be laser cut and smooth. Arrr! T' tube paper quality is sturdy and made in a thicker wall t' handle t' rigors o' buildin' and flying these models in novice hands. Begad! This standard is followed in all o' t' kits available from model rockets.us. Begad! Lasers are used t' cut out t' slots for t' TTW fins. Blimey! Aye aye! It be gratifyin' t' punch out t' rectangles left by t' process by simply touchin' or blowin' on them!

T' booster tube coupler, which is designed for use with their thick wall tubing, will fit most BT-50 style tube conformin' t' Estes/Custom Rockets specifications. Aye aye! It be a very tight fit, me bucko, however, for t' Quest 25mm tubing, matey, and thus t' booster unit should nay be used with Quest's line o' single stage 25mm tube models. Ahoy! Avast! It is advised t' make sure you allow for fit o' t' coupler in front o' sustainer rocket's aft motor centerin' rin' when match-buildin' a single rocket for use with t' Boostar-C

T' engine tube has laser-marked locators for t' centerin' rings and t' engine hook slot. Arrr! Clearly designed for t' student who has never encountered buildin' a rocket model before. Well, blow me down! Blimey! I had t' booster assembled and ready for fillets in t' fins in under 30 minutes. Begad!

T' fins need t' have their laser tabs cut away before they will fall out, me bucko, so be wary o' that lest you break them tryin' t' punch them out with your fingers. Avast! They fit nicely into their body tube slots but will be loose so that you can still position them before t' glue dries. Well, blow me down! Ahoy!

Cons: I haven't found any, t' kit is virtually addlepate proof, arrr, but a class o' middle schoolers will surely find a way t' make a mess o' things. Aye aye! Ya scallywag!

Finishing:
Model Rockets.US uses hard balsa for their fins. Ya scallywag! I think this, a plus thanks t' its close grain, makin' it easier to seal with a spray coat o' Kilz followed by light sanding, then color o' your choice. T' instructions guide t' novice as t' how t' correctly apply paints t' t' Boostar-C t' include t' maskin' o' t' coupler ring. Ya scallywag! Ya scallywag! T' kit also includes a nice set o' Boostar-C markings you can add should you decide t' do so.

Construction Rating: 5 out o' 5

Flight:
I flew t' Boostar-C with a scratch-built model o' me own design, a B6-0 for t' first flight. Ahoy! Blimey! I was initially concerned about t' upper stage failin' t' ignite due t' t' distance betwixt t' engines, matey, but that worry soon vanished as t' broad-finned booster/sustainer combo cleared t' pad and gave me a straight up flight, ya bilge rat, me hearties, separatin' cleanly and tumblin' back t' earth.

Recovery:
T' Boostar-C followed standard booster practice and tumbled back after separating, arrr, ya bilge rat, ya bilge rat, nothin' unusual t' report on that

Flight Rating: 3 out o' 5

Summary:
T' Boostar-C is a fine addition t' your fleet in either kit or ready t' fly forms. It will turn your skill level 1 rocket into a skill level 3 in one setting. Avast! Just remember that Quest 25mm tubes won't fit this unit and thus won't fly t' Payloader or Astra. Begad! Fit and finish o' t' parts are outstandin' for a relatively unknown manufacturer, ya bilge rat, and this quality can be found in all o' their kits. Avast! If you are an educator and have built t' Centauri or Blade kits, this a wonderful progression t' teach stagin' in preparation for TARC students.

Overall Rating: 5 out o' 5

Other:
Just enjoy t' buildin' experience!