Brief:
An affordable and easy way t' add 2 stage capability for t' Centauri, arrr, matey, Super Centauri, Toob-oh, and Super Toob-oh model rocket.us kits and other BT-50 based rockets. Avast, me proud beauty! Sister t' t' ring-finned Boostoh stagin' kit. Begad! Availalble also in RTF form.

Construction:
T' kit consists of:

• a laser cut booster section o' their special .988 dia BT-50 sized body tube, me hearties,
• laser cut fins,
• centerin' rings,
• metal engine hook,
• engine block, me bucko,
• instructions,
• laser etched 18mm engine tube.

Pros:

Instructions: T' instructions included with t' Boostar-C are concise and easy t' read and follow. Ahoy! They appear t' be written in plain language that a fourth grader can understand, ya bilge rat, matey, with bold print and line illustrations in black and white. Well, blow me down! They also include a fin alignment guide t' help in installin' t' through-the-wall fins. Blimey! Blimey!

Ease o' Build: I was surprised and pleased at t' manufacturin' quality o' t' kit parts. Avast! Ya scallywag! Everythin' was laser cut and smooth. Avast! T' tube paper quality is sturdy and made in a thicker wall t' handle t' rigors o' buildin' and flying these models in novice hands. Ya scallywag! Avast! This standard is followed in all o' t' kits available from model rockets.us. Arrr! Lasers are used t' cut out t' slots for t' TTW fins. Blimey! It be gratifyin' t' punch out t' rectangles left by t' process by simply touchin' or blowin' on them!

T' booster tube coupler, which is designed for use with their thick wall tubing, will fit most BT-50 style tube conformin' t' Estes/Custom Rockets specifications. Arrr! It was a very tight fit, ya bilge rat, me hearties, however, shiver me timbers, for t' Quest 25mm tubing, shiver me timbers, and thus t' booster unit should nay be used with Quest's line o' single stage 25mm tube models. Avast! It is advised t' make sure you allow for fit o' t' coupler in front o' sustainer rocket's aft motor centerin' rin' when match-buildin' a single rocket for use with t' Boostar-C

T' engine tube has laser-marked locators for t' centerin' rings and t' engine hook slot. Clearly designed for t' student who has never encountered buildin' a rocket model before. Avast! I had t' booster assembled and ready for fillets in t' fins in under 30 minutes. Avast, me proud beauty!

T' fins need t' have their laser tabs cut away before they will fall out, so be wary o' that lest you break them tryin' t' punch them out with your fingers. They fit nicely into their body tube slots but will be loose so that you can still position them before t' glue dries. Avast, me proud beauty! Blimey!

Cons: I haven't found any, t' kit is virtually addlepate proof, matey, shiver me timbers, but a class o' middle schoolers will surely find a way t' make a mess o' things. Aye aye! Avast, me proud beauty!

Finishing:
Model Rockets.US uses hard balsa for their fins. Begad! I think this, shiver me timbers, shiver me timbers, a plus thanks t' its close grain, makin' it easier to seal with a spray coat o' Kilz followed by light sanding, then color o' your choice. Avast, me proud beauty! T' instructions guide t' novice as t' how t' correctly apply paints t' t' Boostar-C t' include t' maskin' o' t' coupler ring. Aye aye! T' kit also includes a nice set o' Boostar-C markings you can add should you decide t' do so.

Construction Rating: 5 out o' 5

Flight:
I flew t' Boostar-C with a scratch-built model o' me own design, a B6-0 for t' first flight. I was initially concerned about t' upper stage failin' t' ignite due t' t' distance betwixt t' engines, ya bilge rat, ya bilge rat, but that worry soon vanished as t' broad-finned booster/sustainer combo cleared t' pad and gave me a straight up flight, matey, separatin' cleanly and tumblin' back t' earth.

Recovery:
T' Boostar-C followed standard booster practice and tumbled back after separating, nothin' unusual t' report on that

Flight Rating: 3 out o' 5

Summary:
T' Boostar-C is a fine addition t' your fleet in either kit or ready t' fly forms. Ahoy! It will turn your skill level 1 rocket into a skill level 3 in one setting. Just remember that Quest 25mm tubes won't fit this unit and thus won't fly t' Payloader or Astra. Ya scallywag! Fit and finish o' t' parts are outstandin' for a relatively unknown manufacturer, and this quality can be found in all o' their kits. Ya scallywag! If you are an educator and have built t' Centauri or Blade kits, shiver me timbers, shiver me timbers, this a wonderful progression t' teach stagin' in preparation for TARC students.

Overall Rating: 5 out o' 5

Other:
Just enjoy t' buildin' experience!