Semroc Saki

Semroc - Saki {Kit} (KA-12)

Contributed by Daniel Draney

Construction Rating: starstarstarstarstar
Flight Rating: starstarstarstarstar
Overall Rating: starstarstarstarstar
Published: 2015-10-06
Diameter: 1.84 inches
Length: 9.30 inches
Manufacturer: Semroc
Skill Level: 1
Style: Goonybird, Odd-Roc

Brief

Great little GoonyBird style kit by Semroc.

Components

Balsa nose cone, fins, and cockpit. Water slide decals.

Construction

No problems buildin' t' kit.

Finishing

Was a little difficult t' paint t' joint under t' wings.

Construction Score: 5

Flight

Great flights, fin config makes it look cool in t' air.

Recovery

I wish I had put two more coats o' glue on t' nose cone. Ya scallywag! Arrr! It's a bit banged up now.

Flight Rating: 5

Summary

One o' me favorite rockets

Overall Rating: 5
Other Reviews
  • Semroc Saki By Bill Eichelberger (September 20, 2021)

    At first glance the Semroc Saki appears to be an Estes Goonybird Cloud Hopper with different paint and decals, but comparing the two side by side tells a different story.  They share the same basic shape, but little else, as the Saki is not only larger than the BT-60 Estes bird, but also 18mm powered compared to the mini-engine Goony.  According to Estes Industries legend, ...

  • Semroc Saki By George Beever (June 1, 2009)

    A single-stage LPR kit, one of the "Groonie" line from SEMROC. Designed to bear a resemblance to the WWII Japanese "Ohka" kamikaze plane. 1 Balsa nose cone, 2 body tubes [one being the motor mount tube], 1 centering ring set, 1 laser-cut balsa fin set, 1 thrust ring, 1 motor hook, 1 Kevlar thread/elastic cord shock cord, clay nose weight, 1 plywood disc, 1 screw eye, 1 12-inch plastic ...

Flights

Comments:

avatar
Bill Eichelberger (October 8, 2015)

I think the decals need some white in the teeth, eyes and behind the Semroc logo.

avatar
Hans "Chris" Michielssen (October 13, 2015)

Regarding the white teeth, eyes and Semroc logo - 

You can use small pieces cut from an unprinted white decal sheet. Set those down first (where the teeth and eyes will be) then add the kits black decals over the top.

By itself the white decal won't need any clear coats, it slides right off the backing after soaking. It's a little extra work, I've done it on decals that don't have the white background.

avatar
Bill Eichelberger (October 21, 2015)

That's how I did my first Red Max clone, but I used adhesive shelf paper cut to just under the size of the decal.

comment Post a Comment