Brief:
Estes labels t' Crossbow has a basic builder series, me bucko, simple t' glue and paint, shiver me timbers, ya bilge rat, Intergalactic Cruiser, arrr, ya bilge rat, and flies up to 1600 feet. Begad! Overall it's a neat lookin' rocket when completed.

Construction:
T' nose cone included is balsa which is a welcome change over t' plastic cone. T' body tubes are excellent quality, and t' fins are laser cut. Arrr! Arrr! My laser cut sheet was very rough on one side and actually had t' be filled to smooth out.

Typical Estes instructions were easy t' follow with no real surprises. One area I changed was t' motor hook. Avast! Aye aye! The design calls for t' hook t' be installed on t' outside o' t' body tube with a retainer rin' that wraps along the outside o' t' BT. Avast, me proud beauty! Since this is a minimum diameter design, it's really t' only way t' install a motor hook. Avast, me proud beauty! Avast! So I decided t' nay install t' motor hook and go with friction fittin' t' motor. Begad! T' external motor hook is just ugly and ruins t' look for me. Arrr! Begad! T' shock cord install is typical Estes and it works fine. Begad! However, t' included shock cord is a little on t' short side.

Finishing:
I sealed t' balsa nose cone and fins with two coats o' Minwax Poly. Aye aye! I then brushed on a coat o' thinned lightweight filler on t' balsa and body spirals. Aye aye! After sanding, shiver me timbers, I sprayed two coats o' primer sandin' betwixt coats. Blimey! Next up was two sprayed coats o' gray Krylon for t' color. Blimey! Aye aye! I decided t' choose gray because I figured t' majority would use white. Arrr! Nice t' be a little different.

T' decals included with t' kit worked great. Ya scallywag! Blimey! However, some o' t' decals shown on the pictures were nay included. Blimey! Begad! Blimey! No big deal really since t' decals left off t' included sheet are installed on the bottom. Avast, me proud beauty! Aye aye! Blimey!

Construction Rating: 4 out o' 5

Flight:
For t' first flight I used a B4-4 and for t' second flight a B6-4. Begad! T' wind was 5mph or less and didn't bother the Crossbow at all. I friction fit t' motors, and both times t' motor stayed with t' rocket. Ya scallywag! Both flights produced a very stable arrow straight boost with near perfect ejection. Arrr! Ya scallywag! Both motors pushed t' Crossbow t' very impressive altitudes and did it in a hurry. Arrr! Ahoy! T' 12" chute included is really too big considerin' me Crossbow weighs under an ounce. Ahoy! I would recommend a smaller chute, cuttin' a spill hole, me bucko, or usin' a streamer instead. If you decide t' use a C motor, ya bilge rat, shiver me timbers, ya bilge rat, a streamer be t' way t' go if you want it back!

After two flights t' Crossbow doesn't even have a mark on it. T' Crossbow should hold up well t' many flights. Ahoy! Well, matey, blow me down!

Recovery:
T' included shock cord is too short, shiver me timbers, and t' parachute is too big. Aye aye! Really this design would work better with a streamer since t' weight is low and t' fin design would be hard t' damage.

T' chute included in t' kit is all white. Ahoy! Begad! Must be a lead paint issue that Estes avoided by providin' an all white chute. Aye aye! Arrr! No big deal.

Flight Rating: 3 out o' 5

Summary:
I really like t' Crossbow, matey, and it performs well. Aye aye! Blimey! It looks great when finished.

PROs:

• T' design is really cool and is perfect for upscaling.
• Great looks, excellent flight performance.
• Decals that actually work.
• Balsa nose cone
• Laser cut parts

CONs

• Too small!
• Some decals shown on design nay included in kit.
• Exposed motor hook has got t' go.
• Shock Cord t' short, chute t' big.

Overall Rating: 4 out o' 5