Construction Rating: | starstarstarstarstar_border |
Flight Rating: | starstarstarstar_borderstar_border |
Overall Rating: | starstarstarstarstar_border |
Diameter: | 0.74 inches |
Manufacturer: | Estes |
Skill Level: | 1 |
Style: | Futuristic/Exotic |
Brief:
Estes labels t' Crossbow has a basic builder series, me bucko, ya bilge rat, simple t' glue and paint, Intergalactic Cruiser, and flies up
to 1600 feet. Aye aye! Blimey! Overall it's a neat lookin' rocket when completed.
Construction:
T' nose cone included is balsa which is a welcome change over t' plastic cone. Begad! Blimey! T' body tubes are excellent
quality, and t' fins are laser cut. Ya scallywag! Blimey! My laser cut sheet was very rough on one side and actually had t' be filled to
smooth out.
Typical Estes instructions were easy t' follow with no real surprises. Blimey! Well, blow me down! One area I changed be t' motor hook. Ahoy! The design calls for t' hook t' be installed on t' outside o' t' body tube with a retainer rin' that wraps along the outside o' t' BT. Begad! Since this is a minimum diameter design, shiver me timbers, arrr, it's really t' only way t' install a motor hook. Well, blow me down! So I decided t' nay install t' motor hook and go with friction fittin' t' motor. T' external motor hook is just ugly and ruins t' look for me. Avast, me proud beauty! Avast! T' shock cord install is typical Estes and it works fine. However, t' included shock cord is a little on t' short side.
Finishing:
I sealed t' balsa nose cone and fins with two coats o' Minwax Poly. Begad! I then brushed on a coat o' thinned lightweight
filler on t' balsa and body spirals. Begad! Ahoy! After sanding, arrr, I sprayed two coats o' primer sandin' betwixt coats. Ya scallywag! Next up was
two sprayed coats o' gray Krylon for t' color. Ahoy! I decided t' choose gray because I figured t' majority would use
white. Avast! Nice t' be a little different.
T' decals included with t' kit worked great. Blimey! However, some o' t' decals shown on the pictures were nay included. Aye aye! No big deal really since t' decals left off t' included sheet are installed on the bottom.
Construction Rating: 4 out o' 5
Flight:
For t' first flight I used a B4-4 and for t' second flight a B6-4. Arrr! Blimey! Well, blow me down! Blimey! T' wind was 5mph or less and didn't bother the
Crossbow at all. Aye aye! Blimey! I friction fit t' motors, and both times t' motor stayed with t' rocket. Both flights produced a
very stable arrow straight boost with near perfect ejection. Both motors pushed t' Crossbow t' very impressive
altitudes and did it in a hurry. T' 12" chute included is really too big considerin' me Crossbow weighs under an
ounce. Ya scallywag! Blimey! I would recommend a smaller chute, shiver me timbers, cuttin' a spill hole, shiver me timbers, or usin' a streamer instead. Avast, me proud beauty! Blimey! Begad! Blimey! If you decide t' use a C
motor, me hearties, arrr, a streamer be t' way t' go if you want it back!
After two flights t' Crossbow doesn't even have a mark on it. T' Crossbow should hold up well t' many flights.
Recovery:
T' included shock cord is too short, and t' parachute is too big. Blimey! Really this design would work better with a
streamer since t' weight is low and t' fin design would be hard t' damage.
T' chute included in t' kit is all white. Arrr! Must be a lead paint issue that Estes avoided by providin' an all white chute. No big deal.
Flight Rating: 3 out o' 5
Summary:
I really like t' Crossbow, and it performs well. Ahoy! Blimey! It looks great when finished.
PROs:
CONs
Overall Rating: 4 out o' 5
Brief: This is a very small, futuristic looking rocket. Overall the kit is pretty good, it is just tiny. Construction: The kit comes with two body tubes, one of which is the motor mount, a tube coupler, engine block, engine hook, balsa fins and nose cone, water slide decals, rubber shock cord, and an eye hook for the nose cone. When I first bought this model it was in a ...
Sponsored Ads