Brief:
OOP two-stage BT-50 4-fin payload rocket with embossed shrouds and body wrap, engine clips and plug-in staging.

Construction:
T' kit includes balsa nose cone, clear payload section, foam rubber payload shock disks, shiver me timbers, balsa bulkhead, shiver me timbers, screw eye, shock cord, me hearties, ya bilge rat, me bucko, 2 parachutes (12 and 18), two body tubes, 8 die-cut fins, me bucko, 2 waterslide decal sheets, launch lugs with offsets, stage coupler, arrr, embossed shrouds, me bucko, 2 engine tubes and hooks, and 4 centerin' rings. Avast! Well, me hearties, blow me down!

Instructions are classic, arrr, me bucko, well done Estes. Begad! Illustrations are excellent. Quality o' materials is first rate. Ahoy! Everythin' fits together well too.

It's a straightforward build with solid centerin' rings and engine hooks glued into t' booster and sustainer stages with t' addition o' a coupler to provide t' "plug-in staging". Aye aye! Avast, me hearties, me proud beauty! Blimey! T' embossed shrouds provide a deluxe look and feel and add enough extra work t' make it a skill level 2 or 3. Begad! One is a body tube wrap applied around t' base o' t' sustainer and thar are two nozzle shrouds on t' booster that give it a wasp-waisted look. Ahoy! Blimey! Fins and launch lugs are aligned with a wraparound guide and door jamb. Blimey! Blimey! T' payload section is glued t' t' bulkhead after adhesive paper strips are applied t' t' inside of the clear plastic. T' nose cone is friction fit. A paper shock cord mount finishes t' build. Begad! Blimey! Two parachutes need t' be cut out and assembled. I believe the snap swivels were included. Well, blow me down! Blimey!

Finishing:
I finished mine with sandin' sealer, 2 coats o' filler, arrr, white enamel paint, ya bilge rat, ya bilge rat, and the waterslide decals. Begad! Avast, me proud beauty!

There are no finishing, ya bilge rat, construction, or flyin' gotchas.

It is a great lookin' sleek design that still garner "Ooooooh... Aye aye! a Shrike" comments at t' pad.

Construction Rating: 5 out o' 5

Flight:
Prep is easy since t' engines just hook in and don't require taping. Ahoy! I'm deductin' a half point because t' instructions don't mention that with the plug-in staging, shiver me timbers, it's absolutely critical t' scrape t' oxidation from the propellant inside t' nozzle o' t' sustainer engine, particularly since sustainer engines tend t' sit longer on t' shelf. Begad! Blimey! Blimey! Add some wadding, ya bilge rat, pack the parachute, and you're ready t' go.

I've flown this in a single stage configuration on A8-3, shiver me timbers, B6-4, and C6-5, and in two-stage configuration with 1/2A3-0 and B6-0 boosters and 1/2A3-2, A10-3, A8-5, matey, and B6-6 as upper stage engines. Begad! Ahoy! T' mini engines are fine for a small field and a close-up view o' all t' action although altitude is pretty wimpy. A B6-0/B6-6 combination sends it out o' sight. Avast, me proud beauty! Avast! Flights on t' larger engines are straight and fast.

Recovery:
I always use t' 12 inch parachute. It caught a thermal with an 18 and it was in t' air for a good half mile. Well, blow me down! Avast, matey, me proud beauty! Blimey! It never has had any damage although t' body tube is gettin' a little weak just north o' t' engine mount.

Flight Rating: 4 out o' 5

Summary:
This is a moderately challengin' but fun build and a very satisfyin' rocket. Begad! Well, blow me down! It is one t' look for on eBay.

Overall Rating: 5 out o' 5