Clone Zoom Broom Clone
Scratch - Zoom Broom from Baby Bertha {Scratch}
Contributed by Steve Lindeman
| Construction Rating: | starstarstarstarstar |
| Flight Rating: | starstarstarstarstar |
| Overall Rating: | starstarstarstarstar |
Brief
Zoom Broom was t' 1st o' me Goonybird clones modified for 18mm motors as a result o' bein' kit bashed from a Baby Bertha.
Components
Startin' with a Baby Bertha kit (EST 1261) that I purchaced at me local Hobby Lobby, all components except t' balsa wood and decals were used t' make this build. Arrr! Aye aye! While at hobby Lobby I also purchaced a 3/32"x4"x36" sheet o' balsa for cuttin' t' new fins for t' Zoom Broom and t' next three Goonies that I had planed t' build (Cloud Hopper, me bucko, ya bilge rat, Missle Toe, arrr, and Sky Shriek in that order).
Construction
Before t' actuall construction began I went to http://www.oldrocketplans.com/estes/est0853/est0853.htm and download t' plans. Ya scallywag! I then printed out t' decals on plain printer paper so I could get an idea on how long t' BT-60 tube was supposed t' be. Blimey! I read somewhere that all t' goonies were approx. Blimey! Avast, me proud beauty! 8" long so after measurin' t' NC I cut t' BT-60 tube down t' 5 1/2". Arrr! I then checked t' decals against t' BT and t' picture in t' plans and they looked about right. From thar I then used t' fin patterens t' cut new fins. Begad! After they were cut out and paper coated I then followed t' Estes plans for t' Zoom Broom with t' exception o' t' MM which be replaced with t' 18mm Baby Bertha mount.
Finishing
Finishin' was done with entire rocket gettin' two coates o' Rust-0leum 2x white primmer with sandin' betwixt coats. NC was then removed and given two coats o' Krylon Gloss Red while t' rest o' t' rocket got two coats o' Krylon Gloss White. Decal sheet was then sprayed with two coats o' Krylon Clear and everthin' was then left t' air dry overnight. T' followin' day all decals were trimmed from paper and glued on with a glue stick. Begad! Well, shiver me timbers, blow me down! After allowin' glue t' set for a couple o' hours entire rocket got two more coats o' Dupli-Color Clear EFFEX and then set outside t' dry.
Zoom Broom Glamour Shot
Flight
Maiden flight was on 09/09/2007 at a J.M.R.C. Avast, me proud beauty! club launch at M.I.S.(Michigan International Speedway for those o' you who are nay from Michigan) on a B6-4 and was text book perfect. Begad! Remainin' flights have been on B6-4's or B4-4's. Blimey! Haven't had t' nerve t' try it on a C6-7 as it gets high enough on t' B's.
Maiden Flight on a B6-4. Man it's fast off t' pad!
Recovery
While thar be nay a lot o' room for a paracute and dog barf in this little flier it can be done. Ahoy! Avast! Recovery is accomplished by standard Estes parachute that comes with t' Baby Bertha kit.
Summary
Pros: Its a Goony Bird. Most people either love 'em or hate 'em. Arrr! Blimey! Me, arrr, I got bit bad and forsaw a whole fleet o' different Goonies.
Cons: Its a Goony Bird.
#Related Reviews
- Clone Cloud Hopper By Steve Lindeman
Cloud Hopper was my second Goonybird clone that I built by kit bashing an Estes Baby Bertha and as a result has an 18mm motor mount instead of the 13mm that the original Cloud Hopper had. Components Components used for this build were one Estes Baby Berha Kit (1261) and the plans ...
- Clone Missile Toe By Steve Lindeman
Missile Toe was number three in my line of cloned Goonybirds that was built by kit bashing another Baby Bertha kit. As such the plans and decals were downloaded from Ye Old Rocket Plans (http://plans.rocketshoppe.com/estes/est0854/est0854.htm) and used for construction guide. ...
- Clone Sky Shriek By Steve Lindeman
The Sky Shriek was clone number four of the original Goonybirds that I built. And as such is another kit bashed Baby Bertha . The plans were downloaded from http://plans.rocketshoppe.com/estes/est0855/est0855.htm . I then followed these to build the Sky Shriek with the ...
- Clone X-15 By Steve Lindeman
In all fairness I can't do a brief description on this kit as there is a small story behind it. As is normal for me this is not an actual review of the Estes NASA X-15 (0889) [1988-1989]. It is a kit bashed, clone by transition. I came about the idea of doing the X-15 as the G-15 after ...
- Excelsior Rocketry Der Goony Max By Bill Eichelberger
Der Goony Max is an inspired bit of lunacy from Excelsior Rocketry, and I guess depending on where you stand on the Goony issue, this series is either genius or a waste of a good Baby Bertha. Speaking as the one-time-owner of an original Goonybird Cloudhopper, I happen to fall on the genius ...
- Kit Bash GoonyHawk By Steve Lindeman
Here I go again. For those of you that have followed my Goonyness this was Baby Bertha kit bash #14. Again this is not a kit review of the original Estes Hawkeye (Kit #0873) [1986-1996] It is another of my many kit bashes. All ...
- Kit Bash GoonAries SST By Steve Lindeman
Here I go again. For those of you that have followed my Goonyness this was Baby Bertha kit bash #10. Again this is not a kit review of the original Estes Aries SST (Kit #1927) [1983-1984]. It is another of my many kit bashes. ...
- Kit Bash Goony Target Drone By Steve Lindeman
Lucky or unlucky? For those of you that have followed my Goonyness this was Baby Bertha kit bash #13. As such I wanted to play it a little safer with this one so I choose a simpler design. Again this is not a kit review of the original Estes ...
- Kit Bash Goonymarc By Steve Lindeman
The Goonymarc was number eight in my line of modified Baby Bertha kit bashes. I started with the plans from Jim Z's for the Estes kit #654 with the thought of building the glider version of the Bomarc but ended up with the parachute version (kit #657). All templates and decals for this build ...
- Kit Bash NASA Goonasus By Steve Lindeman
One again this is not a kit review of the original NASA Pegasus (Estes Kit #1376) [1982-1986] but another of my many Baby Bertha kit bashes (#12 for those following my Goonyness). All fin patterns and decals came from http://plans.rocketshoppe.com/estes/est1376 ...
- Kit Bash Snarky Jr. By Steve Lindeman
The Snarky Jr. (a.k.a. Goony Shark) was kit bash #6 in what was to become a long list of Baby Bertha's that I converted into various Goony Birds and such. The inspiration for this one of course came from my DynaStar's - Snarky and the fact that I wanted to be able to fly it in the smaller ...
- Kit Bash Streamliner By Steve Lindeman
The Streamliner was the fifth in a series of Baby Bertha kit bashes that I did while building my Goonybird fleet. The first four kits were used to make four of the original Goonybirds from Estes but now it was time for somthing a little different. I remember seeing this model in a&n ...
- Kit Bash USGF Goonasus By Steve Lindeman
For those of you still following my Goonyness this was Baby Bertha kit bash #11. Again this is not a kit review of the original but another of my many kit bashes. All fin patterns and decals came from http://www.spacemodeling.org/JimZ/est0806.htm . The major ...
- Kit Bash USSF Goonyflash By Steve Lindeman
For those of you following my Goonyness this is Baby Bertha kit bash #9. So OK this is not a kit review so much as it's actually another of my kit bashes. All fin patterns and decals came from http://www.spacemodeling.org/JimZ/estes/est1909.pdf . The main ...
- Mo' Skeeter By Chris Gonnerman
This is my Mo' Skeeter, a 320% upscale of the classic Estes Mosquito . It's a rear-ejection model, which avoids the visible nose cone line that most Mosquito upscales suffer from. Components This rocket consists of a Baby Bertha cone , 6" of BT-60, 6" of BT-20, two 20-60 ...
- Modification Baffled-Boat-Tailed-Bigger-Baby-Bertha By Mike Goss
It all started one day after I opened a Baby Bertha kit and found that the motor mount had the wrong size adaptor rings. The rings were for a BT-50 and not a BT-20. I thought about replacing the rings with a correct set, but then the creative juices started to flow, what could I do with this ...
- Modification BioHazard By Dwayne Shmel
This is a kit bash of a Baby Bertha that transforms a mild mannered rocket into mean, green, flying machine--the BioHazard. Modifications: One challenge was the tight fit of three 18mm motor mount tubes inside the BT-60 body tube. The 3 tubes were glued together and the inside "hole" was ...
- Modification Sky Goon By Stan McKiernan
This is a Goonie of one my favorite classic boost gliders, the Sky Dart. The Sky Goon starts as a Baby Bertha and adds wings, stabilizer and engine pod. Modifications: The rear of the nose cone is removed, leaving about 1/2" of shoulder which is glued to the body. The engine mount is built ...
- Scratch Streamliner By Mark Van Luvender
I chose to build the Streamliner for this contest as it truly spoke to me as something I could do--that doesn't happen often. This rocket started out as an Estes Baby Bertha kit. In order to create the "Streamliner", I cut a wedge shaped section out of the body tube starting just below where ...
Related Products
Sponsored Ads
 |
 |