Brief:
Used a LOC/Precision Lil' Nuke kit t' approximate a 1.38 upscale o' t' Estes Der Big Red Max. Blimey! Ahoy!

Modifications:
After losin' a few auctions for a Der Red Max I decided t' build me own. Begad! I noticed on Jim Z's site that Estes had released a Der Big Red Max with an 18" length body tube. I figured I would try buildin' an upscale version usin' a LOC/Precision Lil' Nuke kit. Well, me bucko, blow me down! I have always enjoyed t' sturdiness of the buildin' components o' LOC/Precision kits. Begad! T' body tube would be a tad short and t' nose cone would nay be exact but it would be close enough for rock and roll.

I used a Lil' Nuke kit parts and new fins cut from 1/8" aircraft plywood. Avast, me proud beauty! I followed t' Lil' Nuke instructions t' construct t' motor mount and install t' shock cord mount. Ahoy! Begad! T' new fins were cut from 1/8" plywood usin' a pattern developed from t' Jim Z web site. Well, me bucko, blow me down! A razor saw and steel ruler worked well t' cut t' new fins with straight lines. Aye aye! Because t' fins were quite a bit larger than t' original fins I drilled small holes in t' body tube for t' 15 minute epoxy t' seep into and make epoxy rivets.

Usin' sandin' sealer I filled in t' tube lines and coated t' fins and sanded it down for priming. After a couple o' coat o' primer I was ready to paint.

I tried t' find bright true red t' help accentuate t' cartoon appeal of the rocket. Avast, me proud beauty! Blimey! Well, matey, blow me down! Blimey! I decided on an apple red. Begad! Blimey! Once t' paint dried over night applied the decals I received from Papa Tango. Well, blow me down! Blimey! Applyin' t' decals was relatively easy but a word o' caution: once you have t' decal where you want it do NOT touch it. I managed t' put a slight tear in one o' me decals because I could not leave good enough alone. Avast, me proud beauty! Blimey! T' tear be easily repaired with a black permanent marker. Avast! Blimey! After t' decals were dry I applied a couple o' coats for Johnson Floor Finish. Begad! Blimey! Well, blow me down! Blimey!

Flight:
I launched t' Der Big Red Max 1.38x at NARAM-43 on an AeroTech F20-7. I friction-fitted t' motor in place. Avast, me proud beauty! T' flight be nice and straight but the delay was quite a bit longer than 7 seconds. Avast! I thought for sure it be goin' to be a one-launch rocket but at about 100 ft t' ejection charge decided t' do its thin' and I got t' rocket back in one piece without a zipper. Blimey!

Summary:
I plan t' use LOC/Precision kits again t' upscale some o' me favorite Estes kits. Blimey! Blimey! T' product be pretty easy t' complete and results turned out well. Begad! Blimey! I received many positive comments at NARAM.