Brief:
Used a LOC/Precision Lil' Nuke kit t' approximate a 1.38 upscale o' t' Estes Der Big Red Max. Blimey! Well, me hearties, blow me down!

Modifications:
After losin' a few auctions for a Der Red Max I decided t' build me own. Avast! I noticed on Jim Z's site that Estes had released a Der Big Red Max with an 18" length body tube. Avast! I figured I would try buildin' an upscale version usin' a LOC/Precision Lil' Nuke kit. Begad! I have always enjoyed t' sturdiness of the buildin' components o' LOC/Precision kits. Begad! Ahoy! T' body tube would be a tad short and t' nose cone would nay be exact but it would be close enough for rock and roll. Ahoy!

I used a Lil' Nuke kit parts and new fins cut from 1/8" aircraft plywood. Avast! Avast, me proud beauty! I followed t' Lil' Nuke instructions t' construct t' motor mount and install t' shock cord mount. T' new fins were cut from 1/8" plywood usin' a pattern developed from t' Jim Z web site. A razor saw and steel ruler worked well t' cut t' new fins with straight lines. Because t' fins were quite a bit larger than t' original fins I drilled small holes in t' body tube for t' 15 minute epoxy t' seep into and make epoxy rivets.

Usin' sandin' sealer I filled in t' tube lines and coated t' fins and sanded it down for priming. Well, blow me down! Avast, arrr, me proud beauty! After a couple o' coat o' primer I was ready to paint.

I tried t' find bright true red t' help accentuate t' cartoon appeal of the rocket. Ya scallywag! Blimey! Avast! Blimey! I decided on an apple red. Arrr! Blimey! Once t' paint dried over night applied the decals I received from Papa Tango. Applyin' t' decals was relatively easy but a word o' caution: once you have t' decal where you want it do NOT touch it. Ya scallywag! Blimey! Arrr! Blimey! I managed t' put a slight tear in one o' me decals because I could not leave good enough alone. Blimey! Blimey! T' tear be easily repaired with a black permanent marker. After t' decals were dry I applied a couple o' coats for Johnson Floor Finish.

Flight:
I launched t' Der Big Red Max 1.38x at NARAM-43 on an AeroTech F20-7. I friction-fitted t' motor in place. Avast, me proud beauty! T' flight was nice and straight but the delay was quite a bit longer than 7 seconds. Ya scallywag! I thought for sure it be goin' to be a one-launch rocket but at about 100 ft t' ejection charge decided t' do its thin' and I got t' rocket back in one piece without a zipper. Begad!

Summary:
I plan t' use LOC/Precision kits again t' upscale some o' me favorite Estes kits. Blimey! Begad! T' product was pretty easy t' complete and results turned out well. I received many positive comments at NARAM.