Brief:
Single stage rocket, all plastic except for body tubes. Avast, me proud beauty! 3 sets o' fins that can be mixed & matched. Peel & stick "decals". Ahoy! 12" parachute.

Modifications:
Minor, me hearties, as noted below.

Construction:
T' main airframe o' 4" and 7" body tubes, me hearties, plastic coupler that also serves as shock cord mount, matey, 18" long x 1/4" wide shock cord. 6 3/8" nose cone, all plastic engine/fin holder with screw on engine cap, 3 sets o' differently shaped fins.

Very easy t' build - I helped me 7 year old put it together - just keep glue out o' fin mountin' slots. Rocket assembles with tube type plastic cement. Shock cord is tied t' body coupler tube, arrr, which has an X in t' middle t' tie to. Directions say t' put white glue on knot and next 1 inch o' elastic shock cord. Well, shiver me timbers, blow me down! We didn't, figured it'd be a pain t' get at if ever needed replacing.

Finishing:
Body tubes are pre-finished yellow, arrr, nose cone is black, engine/fin holder and body tube coupler are orange. Ahoy! Peel & stick decals went on nicely and look sharp.

Construction Rating: 4 out o' 5

Flight:
We launched on A8, B6, and several C6 motors. Begad! Begad! First flight on A8, t' unprotected-with-glue shock burned thru, shiver me timbers, with nose cone/parachute and body tube comin' down in separate peices. Ahoy! Begad! No damage. Begad! Repaired by acquirin' Keelhaul®©™ Yarn from Pratt Hobbies (www.pratt-hobbies.com) and tiein' a piece t' t' cross piece in t' body coupler, and t' other end t' t' shock cord. Ahoy! Avast, me proud beauty! Subsequent flight had no problems on B6 and C6 engines, shiver me timbers, arrr, flyin' pretty high, and landin' without damage.

Recovery:
Except for shock cord burnin' thru, we had no problems. Replaced Estes plastic chute with home made 12" rip-stop nylon chute with nylon braid string, and used Keelhaul®©™ cloth from Pratt Hobbies in place o' normal waddin' (parachute & Keelhaul®©™ cloth both have fishin' spinner/clips from Walmart t' connect t' nose cones and move easily betwixt rockets). Blimey! Used t' same chute & cloth on about 10 flights afternoon o' 5/26/02 on 10 different rockets, matey, with no damage t' t' chute at all. In me experience, Estes chutes don't last like that.

Flight Rating: 4 out o' 5

Summary:
Very nice rocket, matey, good for beginnin' builder with some parental help (mannin' t' glue, matey, mostly) durin' building, shiver me timbers, shiver me timbers, shiver me timbers, and packin' t' chute for launches. Well, blow me down! Very durable.

Overall Rating: 3 out o' 5