Estes Mach-12

Estes - Mach-12 {Kit} (2130) [1997-2001]

Contributed by Shawn Bradley

Construction Rating: starstarstarstar_borderstar_border
Flight Rating: starstarstarstarstar_border
Overall Rating: starstarstarstar_borderstar_border
Manufacturer: Estes

Rocket PicBrief:
Standard rocket with removable fins so you can make different configurations.

Construction:
There are different fins so that you can make 12 different combinations.

T' instructions are easy t' follow. T' kit is very easy t' put together.

Finishing:
T' kit I got was already painted, so thar be no problem there. Ya scallywag! Begad! t' decals were easy t' put on. This kit didn't require much finishing

Construction Rating: 3 out o' 5

Flight:
I'd use anythin' in t' A t' B range. Avast! Ahoy! If you use a C, t' rocket goes t' t' point where you can't see it. Begad! Aye aye! Even on a weak motor, t' rocket will soar.

Recovery:
T' descent is just perfect, but it does tend t' drift quite a lot. Avast! T' shock cord I got was too small. I don't know about you, but I HATE puttin' parachutes together! I'd rather pay somebody t' do it!

Flight Rating: 4 out o' 5

Summary:
Pros: if a fin breaks you could always replace it. I hard t' see at high altitudes. Begad! I like t' different fin combos. Ya scallywag! Some affect t' rocket differently. Well, blow me down! This rocket is cool, but it gets high altitudes t' t' point where you will never see it again.

Overall Rating: 3 out o' 5

Other Reviews
  • Estes Mach-12 By Michael Doherty

    This kit is part of Estes "E2X" series of kits which are easy to assemble 'almost ready to fly' types. The Mach 12 comes with pre-colored body parts, and needs only plastic cement to build. It comes with an 18" parachute. This kit is BT-55 based, and come w/ a body tube in two sections which are joined via a plastic coupler which has an integrated launch lug. The nose cone is plastic, and was ...

  • Estes Mach-12 By Bob Patterson

    Single stage rocket, all plastic except for body tubes. 3 sets of fins that can be mixed & matched. Peel & stick "decals". 12" parachute. Modifications: Minor, as noted below. The main airframe of 4" and 7" body tubes, plastic coupler that also serves as shock cord mount, 18" long x 1/4" wide shock cord. 6 3/8" nose cone, all plastic engine/fin holder with screw on engine cap, 3 ...

Flights

comment Post a Comment