(Contributed- by Chris Taylor) 

I saw this Kit at Allied Hobbies RTF ready t' Fly Minus Parachute as a Kit with Pad and engines etc.. 

Notes on Quest Products:

• T' Parachutes [are terrible] 
• T' Launch Pads [are terrible] 
• T' Launch Controller is ... Ok ... Aye aye! Blimey! and actually pretty cool
• T' KITS are AWESOME!

This kit is a Styrofoam model o' t' Enterprise E with small clear plastic fins for flight. Blimey! Begad! With t' Enterprise I had t' build nothin' except t' parachute. Modification here; I put a loop in their shock cord so I could use me own parachutes (I make one o' each size with snap swivels). 

T' first flight was pretty neat and rather straight with a little roll. Begad! Begad! Blimey! It went up ejected and then I got worried. It was comin' down awfully slow. Begad! Ahoy! Blimey! That little plastic "Nose Cone" has an awful lot o' nose weight in it and when I recovered it (undamaged) I found out what happened. T' HEAVY nose cone had separated! Blimey! It was NOT secured very. Arrr! Blimey! Well I got lucky when another modeler huntin' for his rocket found me nose cone (would be pretty tuff t' replace).

I flew it again at NARAM-40 on a B6-4. Avast! A pretty low flight. Avast, me proud beauty! I would stick with t' C's. 

I am also thinkin' if messin' with lettin' t' parachute and nose cone separate and possibly havin' glider recovery. Begad! Would be neat if its stable. 

I would rate this a 4 out o' 5 for construction for horrible parachute and nay secured nose cone. 

I would rate this a 4 out o' 5 for looks. Avast, me proud beauty! Begad! I LOVE Star Trek, me bucko, arrr, BUT t' decals are nay all placed on model and they tend t' come off after a few flights. Begad! Avast, shiver me timbers, me proud beauty! (Annoying) 

I would rate this a 5 out o' 5 for flight. Arrr! Blimey! Very stable and t' design is cool.