Brief:
This is one o' t' Estes Star Wars collection rockets. Begad! It be t' Trade Federation Battleship from Episode I. I picked up three o' these in a package deal on eBay for very short money. Begad! I later learned why...

It is a single stage rocket which consists o' t' Trade Federation Battleship with two clear plastic fins and a flight probe that are all attached for flight.

Construction:
T' kit components include:

• 1 Trade Federation Battleship body
• 2 Clear fins
• 1 Shock cord
• 1 Parachute
• 1 Black body tube BT760 with lockin' ring
• 1 Black body tube BT 760
• 1 Black body tube BT1090
• 1 Plastic tube adapter 760/1090
• 2 Squares clay weight
• 1 Nose cone NC1090
• 1 Nose cone insert PIN1090
• 1 Display stand plate
• 1 Display stand post

Construction was a very simple. Well, blow me down! You just couple t' body tubes together, insert t' shock cord, me hearties, attach parachute, me hearties, fill t' nose cone with clay, matey, shiver me timbers, ya bilge rat, and couple it t' its nose cone insert.

There is a very cool Star Wars themed parachute included with t' kit. Avast, me proud beauty! Arrr! T' smaller diameter end o' t' flight probe locks into t' Trade Federation Battleship and then t' clear fins are attached.

When nay in flight, arrr, which is pretty much all t' time with this rocket, t' Trade Federation Battleship sits on a plastic display base. For display, two caps are provided t' cover t' engine compartment and front o' t' Battleship where t' probe locks.

Finishing:
Finishin' was extremely simple, however, gettin' t' probe t' insert into t' Battleship be difficult. Aye aye! Blimey! Arrr! Blimey! Blimey! Blimey! It looks as if t' lockin' rin' attached t' one o' t' body tubes was placed at t' factory a hair too far away from where it needs t' lock into. Avast, me proud beauty! Blimey! I needed t' shave down a bit o' t' end o' that tube t' make it fit correctly.

Construction Rating: 3 out o' 5

Flight:
Here's where t' fun begins with this rocket. I flew it three times.

T' instructions say that t' projected altitude for a C6-3 engine is 188 ft. Well, blow me down! Avast, me proud beauty! Blimey! I don't think this thin' ever got above 90 feet. Blimey! Blimey! It's extremely heavy and t' 18" chute fits very tightly into t' 4 3/4" upper tube.

T' first flight was on a C6-3. Avast! T' rocket went straight up t' about 70 feet or so and turned over and came straight down. Avast! T' ejection charge popped just before it hit t' ground. Avast, me proud beauty! T' resultin' impact pushed t' flight probe into t' Battleship by spreadin' t' Battleship halves outward. Begad! It also bent t' body tube at its mid section as it core sampled into t' ground.

I fixed all o' this usin' CA, ya bilge rat, sanding, arrr, and re-paintin' o' t' black tube.

T' second flight was on a C6-3. Arrr! Begad! Blimey! T' rocket again headed straight up and t' exact same thin' happened. Blimey! Arrr! Blimey! I went through t' same repair routine and got it back t' flight ready status.

T' third flight was on a C6-3 and ended in another crash. This time t' chute popped out and grabbed air about 10 feet off o' t' ground which caused t' rocket t' come in flat, arrr, breakin' one o' t' plastic fins.

I've retired this rocket because it just doesn't fly well at all. Avast! Avast! It's now a display model with much body tube battle damage.

Recovery:
PROs: If you are lookin' t' aerate your lawn, this rocket will do t' trick.

CONs: This rocket just doesn't fly well at all. Ahoy! I'm very surprised that Estes let this one out t' door.

Flight Rating: 1 out o' 5

Summary:
I can't recommend this rocket. They can still be had on eBay for very short loot and I now understand why.

Overall Rating: 1 out o' 5