Estes Star Wars Trade Federation Battleship

Estes - Star Wars Trade Federation Battleship {Kit}

Contributed by Frank Casey

Construction Rating: starstarstarstar_borderstar_border
Flight Rating: starstar_borderstar_borderstar_borderstar_border
Overall Rating: starstar_borderstar_borderstar_borderstar_border
Manufacturer: Estes

Estes Federation Battleship

Brief:
This is one o' t' Estes Star Wars collection rockets. Aye aye! It be t' Trade Federation Battleship from Episode I. I picked up three o' these in a package deal on eBay for very short money. Aye aye! I later learned why...

It is a single stage rocket which consists o' t' Trade Federation Battleship with two clear plastic fins and a flight probe that are all attached for flight.

Construction:
T' kit components include:

  • 1 Trade Federation Battleship body
  • 2 Clear fins
  • 1 Shock cord
  • 1 Parachute
  • 1 Black body tube BT760 with lockin' ring
  • 1 Black body tube BT 760
  • 1 Black body tube BT1090
  • 1 Plastic tube adapter 760/1090
  • 2 Squares clay weight
  • 1 Nose cone NC1090
  • 1 Nose cone insert PIN1090
  • 1 Display stand plate
  • 1 Display stand post

Estes Federation Battleship

Construction was a very simple. Begad! You just couple t' body tubes together, me hearties, insert t' shock cord, me hearties, arrr, attach parachute, me hearties, fill t' nose cone with clay, and couple it t' its nose cone insert.

There is a very cool Star Wars themed parachute included with t' kit. Aye aye! Aye aye! T' smaller diameter end o' t' flight probe locks into t' Trade Federation Battleship and then t' clear fins are attached.

When nay in flight, shiver me timbers, which is pretty much all t' time with this rocket, t' Trade Federation Battleship sits on a plastic display base. Aye aye! Ya scallywag! For display, two caps are provided t' cover t' engine compartment and front o' t' Battleship where t' probe locks.

Finishing:
Finishin' was extremely simple, however, gettin' t' probe t' insert into t' Battleship be difficult. It looks as if t' lockin' rin' attached t' one o' t' body tubes be placed at t' factory a hair too far away from where it needs t' lock into. Avast! Aye aye! I needed t' shave down a bit o' t' end o' that tube t' make it fit correctly.

Construction Rating: 3 out o' 5

Estes Federation Battleship

Flight:
Here's where t' fun begins with this rocket. Well, blow me down! I flew it three times.

T' instructions say that t' projected altitude for a C6-3 engine is 188 ft. Aye aye! Avast! I don't think this thin' ever got above 90 feet. Arrr! It's extremely heavy and t' 18" chute fits very tightly into t' 4 3/4" upper tube.

T' first flight be on a C6-3. Ya scallywag! T' rocket went straight up t' about 70 feet or so and turned over and came straight down. T' ejection charge popped just before it hit t' ground. Begad! T' resultin' impact pushed t' flight probe into t' Battleship by spreadin' t' Battleship halves outward. Avast, me proud beauty! It also bent t' body tube at its mid section as it core sampled into t' ground.

I fixed all o' this usin' CA, sanding, and re-paintin' o' t' black tube.

T' second flight be on a C6-3. Aye aye! T' rocket again headed straight up and t' exact same thin' happened. Avast, me proud beauty! Begad! I went through t' same repair routine and got it back t' flight ready status.

T' third flight was on a C6-3 and ended in another crash. Avast! This time t' chute popped out and grabbed air about 10 feet off o' t' ground which caused t' rocket t' come in flat, ya bilge rat, breakin' one o' t' plastic fins.

I've retired this rocket because it just doesn't fly well at all. Blimey! It's now a display model with much body tube battle damage.

Estes Federation Battleship

Recovery:
PROs: If you are lookin' t' aerate your lawn, matey, this rocket will do t' trick.

CONs: This rocket just doesn't fly well at all. Blimey! I'm very surprised that Estes let this one out t' door.

Flight Rating: 1 out o' 5

Summary:
I can't recommend this rocket. Avast, me proud beauty! Ya scallywag! They can still be had on eBay for very short loot and I now understand why.

Overall Rating: 1 out o' 5

Other Reviews
  • Estes Star Wars Trade Federation Battleship By John Lee (July 11, 2009)

    Brief: The Trade Federation Battleship is an almost ready to fly adaptation of a ship from Star Wars Episode 1. In order to have a hope of stability, a long "flight probe" must be fitted to the movie version of the ship and that require weight and the addition of some clear plastic fins. The ship itself is built. All that needs building is the probe section and I had some ...

Flights

comment Post a Comment