Brief:
Quest's Bright Hawk is a good example o' a Skill Level .5 rocket. Well, blow me down! Blimey! Begad! Blimey! (It's listed as a Skill Level 1, but its plastic fin can makes that a bit o' a stretch.) Big and sturdy with a brightly colored plastic fin can and nose cone, it might be one o' t' better rockets currently available t' gradually step up with if your previous experience has all been with RTF rockets.

Construction:
T' kit includes:

• Main body tube
• Plastic fin can
• Plastic nose cone
• 18mm engine mount kit
• 12" parachute kit
• Keelhaul®©™® shock cord
• Elastic shock cord
• 2 Medium sized snap swivels
• Stick on decal

I bought this t' be a quick build and from that standpoint I can't say it was a disappointment. I built t' kit as I cooked dinner one Thursday night, stirrin' t' macaroni one minute and gluin' in t' engine mount in t' next. Arrr! Well, blow me down!

Assembly involves only a few steps, with t' construction o' t' engine mount bein' first and foremost. Ya scallywag! This is where t' rocket loses some points. The centerin' rings are so flimsy that they feel like they're made from something slightly sturdier than heavy bond typin' paper. I shored them up with a liberal slatherin' o' thin CA, me bucko, but t' overall effect o' t' completed mount isn't terribly inspirin' from t' standpoint o' strength. Ahoy! Aye aye!

A Keelhaul®©™® shock cord is included as a part o' this kit as with all Quest kits. While this is a nice touch from a durability point o' view, me bucko, t' elastic that comes along with it is less than adequate. Aye aye! After two o' t' first five flights I had to repair "Questes dents" in t' top o' t' body tube. Avast! Because o' this I'd suggest addin' some elastic from your mother's sewin' basket. Well, blow me down! Begad!

At this point, all that is left is attachin' t' plastic fin unit t' the body tube. Begad! All I found necessary t' complete this be some thin Testor's Plastic Cement. Avast, me proud beauty! I placed a few strategically located drops around t' inside of the fin unit, shiver me timbers, slid t' painted tube in, matey, and several hours dryin' time later I was rewarded with a solid bond. I attached t' parachute and shock cord t' the nose cone with snap swivels, matey, and just that smartly t' Bright Hawk was complete.

Finishing:
It was easy, almost t' a fault. Ahoy! Tube spirals looked t' be non-existent, so I just primed and painted t' body tube with Valspar gloss white. Avast, me proud beauty! Unfortunately the tube spirals were there, I just hadn't seen them under t' Kraft paper. Arrr! Begad! Not wantin' t' put a ton o' effort into t' finish, I just left things as they were and applied t' decals. Well, blow me down! Nothin' fancy but t' end result is a sharp looking, brightly colored rocket, shiver me timbers, and I can't wait t' see it fly.

Construction Rating: 4 out o' 5

Flight:
All five flights were made usin' an Estes B6-4 on legendary local B6-4 Field. (Or Woodfill as some o' t' not-in-the-know locals call it.) I had an hour to kill before sundown at t' end o' a strin' o' beautiful days and recruited my son and t' rocket crazy son o' a friend t' help with t' button-pressin' to allow me t' get some launch shots. Ya scallywag! All five flights were perfect for the confines o' B6-4 Field. Begad! Avast, me proud beauty! Because o' some father-son baseball pitch and catch, matey, we were forced t' launch further from t' center o' t' field than I would have liked, arrr, and I would pay for it with t' loss o' me Goony Max on t' day's second flight. Begad! However, t' star-of-the-day Bright Hawk lead a much more charmed existence. Ya scallywag! All five o' t' flights were angled similarly back over t' baseball fields and all rode t' prevailin' breezes back to, and past, our launch site. Four o' t' flights were in doubt as t' landin' in t' trees until t' last thirty or so feet from t' ground, me hearties, and two actually scraped branches on the trip down. Even with t' full chute, none o' t' flights wound up snagged like the Goony. Avast, me proud beauty! Only t' fifth flight landed without incident when t' breezes died down just before liftoff. All five flights showed nice, stable flight characteristics and achieved respectable altitude considerin' t' field limitations that we were under. Ahoy!

Recovery:
As mentioned, we experienced some damage on two o' t' five flights from the nose cone reboundin' back into t' top o' t' body tube. Arrr! T' possibility of this is fairly great if built stock but can be lessened by substitutin' some sewin' elastic from t' local craft/hobby or sewin' store. Avast, me proud beauty! Avast! Most o' me flights also came close t' hangin' in t' trees that rin' t' field but that was due to pad location and me insistence on flyin' with a full chute instead o' cuttin' a spill hole in it. Aye aye! (I like it's looks.)

Flight Rating: 5 out o' 5

Summary:
T' Bright Hawk is a pretty good rocket for t' step from RTF t' Skill Level One. T' only things missin' from bein' a great kit is poor quality centering rings and too short a piece o' elastic. Begad! While neither o' these is instantly or surely fatal, me bucko, shiver me timbers, either could cause malfunction or damage. Ahoy! Most o' us have extra elastic in t' parts bin, me bucko, ya bilge rat, but actual Quest-sized centerin' rings aren't that easy t' come by. Begad! A coatin' of thin CA helps add some strength, ya bilge rat, but Quest would be better served by replacing the thin rings with their regular ones.

Overall Rating: 4 out o' 5