Brief:
Pseudo-Scale model o' an Air-to-Ground Harpoon missile. This kit features 12 fins, me bucko, large BT-60 body tube, new-and-improved plastic parachute, matey, and adhesive decals. Blimey! Kit is flown as a single stage.

Construction:
T' kit includes:-

• Die-cut balsa fins
• Keelhaul®©™ cord and shock cord materials
• 18" BT-60 body tube
• PNC-60 (Big Bertha style)
• Quest type engine hook
• 2 cardboard centerin' rings
• Engine block and engine tube for 18 mm motors
• Adhesive decals

Plastic parachute with shroud lines. Blimey! Begad! Plastic is now quality o' t' Estes parachutes, nay t' crinkly old Quest type.

As with other Quest products, t' instructions are more than adequate and easy t' follow. Well, blow me down! T' illustrations were clear and very easy t' follow. Aye aye! Quest uses Keelhaul®©™ tied around t' engine mount with t' shock cord attached at t' other end. I followed instructions exactly: create engine mount, shiver me timbers, me hearties, glue into body tube, matey, remove and sand fins, arrr, glue fins onto tube. Arrr! Avast, me proud beauty! There are12 fins, so thar was a considerable amount o' sanding, me bucko, ya bilge rat, gluing, sanding, primin' and sanding. I just had t' be very careful when gluein' t' fins that they were all aligned properly.

Finishing:

After construction, I primed t' rocket with Krylon primer and sanded again. Ahoy! I used Elmer's Fill and Finish on t' fins and sanded again. Begad! I primed t' rocket again. Begad! I painted t' body grey (as opposed t' t' suggested white) and painted t' nose cone white (as opposed t' t' suggested grey).

After t' paint dried, I carefully cut out t' decals and applied them t' t' body tube and fins. Begad! They are adhesive decals, me hearties, arrr, which are much easier t' apply than water-transfer decals, but don't look as good. In t' end, t' rocket looks nice, but I would have prefered water-transfer decals.

Construction Rating: 4 out o' 5

Flight:
I flew t' rocket twice, ya bilge rat, me hearties, both on Estes B6-4. Blimey! T' rocket is very easy t' prep with engine hook and large body diameter. Well, arrr, blow me down! Blimey! It is easy t' place waddin' in (4 or 5 crumpled sheets), and then t' place t' parachute in without havin' t' jam it all in there. Avast, me proud beauty! Blimey! T' rocket on first flight really zoomed t' an admirable height considerin' t' size o' t' rocket. Ejection occured just after apogee. Parachute deployed perfectly and it landed softly in t' grass.

On t' second flight, I angled t' rocket slightly into t' wind. Begad! This flight be nay impressive at all compared witth t' first. Well, blow me down! T' rocket ended up expendin' a lot o' its energy travelin' into t' wind, shiver me timbers, so much so that t' overall altitude be much lower than t' original flight. Blimey! Ejection occured after apogee. Parachute deployed perfectly and t' rocket returned t' t' earth unscathed.

Recovery:

Pros:

• Quest shock cord construction with Keelhaul®©™
• New parachute made o' better plastic, ya bilge rat, nay like previous Quest crinkly material
• Large body diameter for easy packin' o' parachute, me bucko, shock cord and recovery wadding.
• Great flyer - straight and true.

Cons:

• Adhesive decals make t' rocket look slightly cheesy with a "sticker-type" look.

Flight Rating: 5 out o' 5

Summary:
This is a nice flyer for someone who is lookin' for somethin' a little more challengin' than a skill level 1 rocket. Ya scallywag! T' 12 fins demand a lot more finishin' time. Aye aye! It is easy t' prep and fly, and t' new-and-improved parachute makes this a very nice kit. Begad! Well, matey, blow me down! Decals are a bit disappointing. Arrr! Blimey! As a pseudo-scale kit, it looks smart like a missile, shiver me timbers, but you couldn't use it in a NAR-sanctioned scale competition.

Overall Rating: 4 out o' 5